Frame construction from wire shelf components in stainless steel or chrome plating. 1" diameter posts grooved on 1" increments. Hanger bars feature 2½" centered slots, hooks on 1½" centers staggered vertically, or 1" diameter hanger tube are adaptations for storing gowns.
Racks with Hanger Slots:• Hanger bar constructed of heavy gauge type 304 stainless steel with hanger slots spaced on 2½" (64mm) centers• 1" (25mm) square 3-sided frame along the bottom• Finishes available chrome or Electropolished.Racks with Hooks:• Top wire shelf features 2 gauge hooks welded to underside of top wire shelf• Standard wire undershelf• Finishes available are chrome of electropolished.Racks with Hanger Tube:• 1" (25mm) diameter full-length hanger tube, grooved at 1" increments, is suspended on underside of wire shelf via two 2-gauge hooks, one on each end• 1" square H-frame along the bottom• Finished available are chrom or stainless steel.Wire Shelving Components:• All units feature wire shelf with patented QuadTruss® construction (patent #5,390,803)• Top mat assembly constructed of 10 gauge mat wires welded to full length 6 gauge inside suppot wires and serpentine trusses• At front and rear of shlef, mat wires are welded to a four-wire truss assembly constructed of a 2 gauge bottom wire, a 6 gauge serpentine truss wire which creates a bridge-like reinforcement, and two 6 gauge top wires - one directly below mat wires and one directly above, providing a pincer hold on mat wires.• Posts are 1" diameter, grooved on 1" (25mm) increments, and provided with leveling feet. Optional foot plate sare available to attach unit to the floor (contact PAC for details.)
Built with Volusion