1½" welded tube frame is shipped knocked-down and bolted together with cross members. Surface is either electropolished or brushed 300 series stainless steel. Available with non-removable or removable hangers, see product name for details on finish and hanger type. Nylon dissipative feet are standard. Hanger slots are standard on 3" centers, with other spacing available (Custom, non-stock. Call PAC for details).
Design & Construction Features• 14 gauge hanger rails with hanger slots spaced on standard 3" (76mm) centers. Slots are designed to retain gowns in a fixed position by allowing the hangers (not included) to swing front-to-back but not left-to-right, while the shape facilitates a smoother laminar flow than many square hanger rails• Verticle supports are constructed of heavy gauge type 304 stainless steel 1½" (38mm) square tubing, fully welded, ground and polished to its original finish. Each unit is supplied iwth four adjustable feet that are constructed to dissipate a static charge.• Horizontal supports are bolted to verticle uprights using stainless steel bolts. Constructed of 1" (25mm) O.D. type 304 stainless steel tubing with heavy gauge stainless steel backing plate. The bolts are covered with a stainless steel cap to eliminate any crevasses in which dust might settle.• Hanger rail is contructed of heavy gauge 304 stainless steelwith hanger slots located every 3" (76mm) along the length of the rail. Other spacing available (contact PAC for details)• Standard 2" (51mm) diameter, nylon dissipative feet with ½" (13mm) adjustability. Optional footplates available to affix gowning rack to the floor (contact PAC for details).• Available with non-removable hanger contruction (see part number: if it ends in N it is non-removable, R is for removable). A domed cap over the hanger rail secures hangers and prevents removal.• Finishes available are 304 series stainless steel with a #4 satin finish or an electropolished finish.
eCommerce by Volusion