Torrey Pines Scientific HP51

Digital Hot Plate with Ceramic Top, 12" x 12"

The EchoThermis designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit offered as an accessory. The chassis on both models are cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy-based paint for durability.

Special Price $1,435.50 Regular Price $1,595.00

Ceramic glass tops have a maximum plate surface temperature in our units of 450ºC. They heat and cool very quickly. They are designed for heating a solution in a vessel and handle spills well.

Features

  • Extremely easy use by anyone in your lab
  • Platinum RTD temperature measurement for precision and accuracy
  • Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface are framed in cast aluminum to keep the edges cool.
  • Milled flat cast aluminum tops available for heating directly on the heater surface.
  • PID temperature control for exact, tight sample control of plate or solution
  • Temperature ramping for exact heating and cooling rates
  • Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
  • Electronic calibration stored in chip. No batteries to replace
  • Full-featured digital display for checking all parameters instantly
  • Fused for safety
  • UL, CSA and CE certified

Applications

  • Testing silicon wafers at various different temperatures
  • Determine setting temperatures of epoxies and glues
  • Repairing printed circuit boards
  • Drying silicon wafers after washing
  • Heating small injection molds for repair at controlled temperatures and heating/cooling rates
  • Testing the melt point of waxes (ring and ball tests)
  • Testing the melt point of solders
  • Electrochemistry
  • General cleaning of parts or heating samples in a laboratory at exact temperatures
  • Catalysis studies
  • General chemistry lab use with precise heating

Full Product Specifications

Temperature Measurement

  • Platinum RTD: 100 ohm at zero in plate
  • Temperature Range: 0°–450°C
  • Readability: 1°C
  • Temperature control type: PID
  • Temperature accuracy: 1% ±
  • Temp stability: 1°C
  • Heater power: 1400 watts

Electrical

  • VAC: 115 VAC, 50/60 Hz (230 VAC available upon request)
  • Ceramic top: 15 amp 100, 115 VAC, 8 amp 230VAC
  • Fusing: Yes
  • Line Cord: Detachable, 6 foot (1.8 meter), three-wire, grounded
More Information
PAC Item Code I173969
MFG Part Number HP51
Brand Torrey Pines Scientific
Surface Ceramic
Adjustment Digital
Input 115V
Type Hot Plate Stirrer
You May Also Be Interested In
©Production Automation Corporation. All Rights Reserved.