Programmable Hot Plate with Aluminum Top, 6" x 6"
EchoTherm™ Fully Programmable Digital Hot Plates and Digital Stirring Hot Plates are the most advanced and easy-to-use units available. In manual operation, simply select the parameter to be set and enter the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds, and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
The aluminum tops have a maximum plate surface temperature of 450ºC. They are recommended for heating a solid on the heater plate surface. They have a better temperature distribution across the plate surface than the ceramic tops.
Features
- 10-program memory stored in CMOS. No batteries required
- Each program can be 10 steps, where each step includes a temperature, time and heating rate
- Repeat any program 1–98 times automatically. Infinite repeats settable
- Programmable and non-programmable operation
- Platinum RTD temperature measurement for ±1% accuracy
- Milled-flat cast aluminum top for use with solids on the plate surface
- Temperature ramping for exact heating and cooling rates
- PID temperature control to 1°C on plate surface or solution with probe
- Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
- Electronic calibration stored in CMOS
- RS232 interface for control or recording data on a computer
- Custom display of all parameters all the time
- 12-month warranty
- UL, CSA and CE compliant
Applications
- Removal of oxides from metallic powders
- Precise control of polymerization reactions in the preparation of glasses at precise temperatures
- Gas solubility in organic solvents
- Preparing metals for precision microscopic welding
- Acid bath removal of thin film optical coatings
- Modeling production run industrial processes
- Development of processes and materials for the semi-conductor industry
- Process control in the extraction of beryllium from ores
- Preparation of heat sensitive culture media
- Digestion of plant tissue samples for assay of organic elements
- Ring and ball testing
- General chemistry laboratory use where exact temperatures are needed
Specifications
Programming
- Memory capacity: 10 programs
- Individual Program Capacity: 10 steps per program where one step is a temperature, ramp rate (if wanted) and time
- Repeat a Program Automatically: 1 to 98 times or infinitely
Temperature Measurement
- Platinum RTD: 100 ohm at zero in plate and in probe
- Temperature Range: 0–450°C
- Readability: 1°C
- Temperature control type: PID
- Temperature accuracy: 1% ±
- Temp stability: +/- 1°C
- Heater power: 400 watts
Electrical
- Watts: 400 watts
- VAC: 115 VAC, 50/60 Hz
- Fused: Yes
- Line Cord: Detachable, 6 foot (1.8 meter), three-wire grounded
| Sell Unit | Each |
|---|---|
| PAC Item Code | I173975 |
| MFG Part Number | HP60A |
| Brand | Torrey Pines Scientific |
| Surface | Aluminum |
| Adjustment | Programmable |
| Input | 115V |
| Type | Hot Plate Stirrer |
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.