Programmable Stirring Hot Plate with Ceramic Top, 12" x 12"
When you cannot be in two places at once, this equipment is ideal for complete walk-away heating and stirring applications. All units are supplied with a stainless steel immersion probe. EchoTherm™ Fully Programmable Digital Hot Plates and Digital Stirring Hot Plates are the most advanced and easy-to-use units available. In manual operation, simply select the parameter to be set and enter the value needed. The unit will do the rest. In the programmable mode, routines can be stored for instant recall and use. The stored routine will run automatically, without attention, and exactly the same time after time.
Programs can be simple or complex depending upon the need. Multiple temperatures, temperature ramp rates, stirring speeds, and timed events can be stored. When run, the unit monitors the program to be sure it runs exactly as written. Complete walk-away automation.
Ceramic glass tops have a maximum plate surface temperature in our units of 450ºC. They heat and cool very quickly and are more corrosion-resistant than aluminum plates. They are designed for heating a solution in a vessel.
Features
- 10-program memory stored in CMOS. No batteries required
- Each program can be 10 steps, where each step includes a temperature, stirring speed, time, and heating rate
- Repeat any program 1–98 times automatically. Infinite repeats settable
- Programmable and non-programmable operation
- Platinum RTD temperature measurement for ±1% accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface
- Temperature ramping for exact heating and cooling rates
- PID temperature control to 1°C on plate surface or solution with the accessory probe
- Stir aqueous solutions from 100–1500 rpm
- Stirrer capacity aqueous solutions: 4 liters
- Timer goes up to 99 hours, 59 minutes, 59 seconds with user settable Auto-Off
- Electronic calibration stored in CMOS
- RS232 interface for controlling or recording data on a computer
- Custom display of all parameters all the time
- 12-month warranty
- UL, CSA, and CE compliant
Applications
- Removal of oxides from metallic powers
- Precise control of polymerization reactions
- Gas solubility in organic solvents
- Digestion of plant tissue samples for assay of organic elements
- Ring and ball testing
- Process control in the extraction of metals from ores
- Development of processes and materials for the semiconductor industry
- Acid bath removal of thin-film optical coatings
- Leaching studies
- Catalysis research
- Dissolutions
- Blending petrochemical products
- Makaing agarose solutions
- Electrochemistry
Specifications
Programming
- Memory capacity: 10 programs
- Individual Program Capacity: 10 steps per program where a step is a target temperature, heating rate, stirring speed, and timer
- Repeat a Program Automatically: 1 to 98 times or infinitely
Temperature Measurement
- Platinum RTD: 100 ohm at zero in plate and in probe
- Temperature Range: 0°–450°C
- Readability: 1°C
- Temperature control type: PID
- Temperature accuracy: 1% ±
- Temp stability: 1°C
- Heater power: 1400 watts
Stirrer
- Speed range unloaded: 100-1500 rpm
- Readability: 1 rpm
- Settability: Nearest 10 rpm
Electrical
- VAC: 115 VAC, 50/60 Hz (230 VAC available upon request)
- Fused: yes
- Line Cord: Detachable, 6 foot (1.8 meter), three-wire grounded
Dimensions
- Width: 12.5” (31.75 cm)
- Depth: 18.0”(45.7 cm) without line cord plugged in
- Height: 4.5” (11.43 cm)
| Sell Unit | Each |
|---|---|
| PAC Item Code | I174029 |
| MFG Part Number | HS61 |
| Brand | Torrey Pines Scientific |
| Surface | Ceramic |
| Adjustment | Programmable |
| Input | 115V |
| Type | Hot Plate Stirrer |
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.