Home > Dispensing & Adhesives > Valves >

  SV1000SS Stainless Steel Spray Valve
SV1000SS Stainless Steel Spray Valve


 
Our Price: $646.00

Product Code: SV1000SS-IJ
Qty:

  
Description
 
The SV1000SS spray valve provides close tolerance spray dispensing of fluids up to 1000cps. The SV1000SS is contructed of stainless steel to provent corrosion from volatile materials. With a spray angle of 12° and an operating frequency of 200 cycles/min, the SV1000SS is designed for sraying flux, urethane, paint, lubricants, and coating and conformal coating applications.

• Shot rate frequency of 200 cycles/min
• Stainless steel fluid body
• Stroke adjustment to fine-tune spray area
• Nozzle design prevents clogging
• Designed for materials under 1000cps
More Information
• Weight: 10.25oz.
• Operating Air Pressure: 70-100psi
• Atomizing Air Pressure: 1-30psi
• Fluid Viscosity Range: up to 1000 cps
• Fluid Pressure: 1-100psi (0.1 - 7 bar), depends on material viscosity
• Nozzle Diamter: 0.028" (0.71mm)
• Flow Rate: Up to 28cc/sec
• Operating Frequency: Over 200 cycles/min
• Spray Angle: 12°
• Spray Pattern: Circular (Conical)
• Operating Ait Inlet: 10-32 thread with push-in fitting for 1/4 tube
• Atomizing Air Inlet: 10-32 thread with push-in fitting for 1/4 tube
• Material Inlet: 1/8 NPT with compression fitting for 1/4 tube


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Dispensing & Adhesives > Valves