Home > Dispensing & Adhesives > Valves >

  VDP150 Positive Displacement Valve, 110V
VDP150 Positive Displacement Valve, 110V


 
Our Price: $940.00

Product Code: VDP150-IJ
Qty:

  
Description
 
The VDP150 positive displacement valve was developed for dispensing small shots of low and medium viscosity materials. The double-acting metering system provides accurate shot sizes of 0.005cc to 0.015cc. The VDP150 us designed for use with the VC-1195A Valve Controller.

• Designed for low to medium viscosity materials
• Dispenses accurate micro-shots of 0.005cc to 0.015cc
• Storke adjustment feature provides accurate shot size control
• Suck-back feature eliminates post-dispense "dripping"
More Information
• Operating Air Pressure: 60-90psi
• Material Delivery Pressure: Spring Wire Diameter = ø0.3mm Max, 0.3kgf/cm2, Spring Wire Diameter = ø0.5mm - Max, 1.2kgf/cm2
• Cycle Rate: 120 cycles/min (full stroke)
• Minimum Shot Size: 0.005cc
• Maximum Shot Size: 0.15cc/cycle
• Measuring Type: Plunger
• Weight: 320g
• Driving Part Materials: Cylinder Body, CAP : AL hard Anodizing (BLACK), Piston: SUS303, Check Body: SUS303, RULON, Chamber: SUS303, Check VAlve: PEEK, O-Ring: Perfluore
• Connecting Ports: Operating Air Input: M5xP0.8 ø4 Ureathane hose, Material Inlet: BSPT1/8", Material Outlet: Luer Lock (Male)


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Dispensing & Adhesives > Valves