BenchPro™ R-Series Workbenches

BenchPro R-Series Value Line Workbench with Accessories
BenchPro Workbenches

BenchPro™ Value Line Workbenches (R-Series)

BenchPro™ R-Series workbenches feature folded steel leg design, making them one of the most affordable workbenches on the market!

Image shown with these available options:
(1) Earthquake safe light and bracket mounts.
(2) Standard adjustable top shelf.
(3) Adjustable bin box rail.
(4) UL listed power strips available in many lengths & designs.
(5) 14 gauge steel legs.
(6) 250 lb. capacity upright sets.
(7) 1.25" thick solid core steel reinforced top.
(8) Adjustable work surface from 30" to 36".
(9) Drawers with full extension chrome plated ball bearing slides.

Other accessories also available. See below for workbench assembly instructions.

*Benches over 72" long are built with a third support leg in the middle for required support.
Request a Free Quote or Shop Online. Begin by choosing a work surface:
Formica Laminate Worksurfaces
ESD Laminate Worksurfaces
Cleanroom Laminate Worksurfaces
Phenolic Resin Worksurfaces
Stainless Steel Worksurfaces
Butcher Block Worksurfaces

Formica™ Laminate

Formica™ is the heaviest grade laminate available today and used in all standard applications.

ESD Laminate

ESD Laminate is used for applications where delicate electronics could be damaged by static charge.

Cleanroom Laminate

Cleanroom Laminate is sealed on all sides to reduce contamination and is rated for Class 100 environments.

Phenolic Resin

Phenolic Resin is durable nonporous, making it moisture and chemical resistant and easy to clean.

Stainless Steel

These worksurfaces have a particle board core wrapped in 18 gauge type 304 brushed stainless steel.

Butcher Block

Butcher Block worksurfaces are recommended where heavy use requires a durable material.

BenchPro™ is the only national workbench manufacturer that welds the frame together and assembles it to the top.

1. Place your new workbench on top of a table with the cardboard seam facing up. Open the carton. Do not remove the cardboard yet - this prevents the work surface from scratching.

2. Assemble the lower reinforcing bar. The predrilled holes will center the bar.

3. Find the predrilled holes at each end of the top which match the hole pattern in the upper frame. Insert screws in every hole.

4. Slide the adjustable leg set into the upper bracket until it is in position to give you the desired height. Attach with fasteners provided and tighten securely.

5. Line-up and install leg reinforcing bar across the back legs.

6. Assembly any accessories. When you're done, you can turn the bench over. For your safety, we recommend two people. Please recycle the cardboard.