Speak to a Production Automation Sales Representative
  • Toll Free: (888) 903-0333
  • South Central US: (800) 442-4008
  • Contact Sales: info@gotopac.com

Botron B9201 Continuous Monitor (1 Operator)

Your Price: $42.82
  • Buy 10 for $41.32 each
  • Buy 25 for $40.04 each
OR

Details

The Botron B9201 is designed to monitor resistance of the operator's path to ground. It comes with a built in audible alarm and LED, triggering either when the operator falls out of spec, becomes disconnected, or ground is lost. It is a xed resistor system and is go no go, there is no calibration needed. A full time monitoring system is necessary to reduce latency on the assembly line.

Applications:
The Botron B9201 is designed to monitor resistance of the operator's path to ground. It comes with a built in audible alarm and LED, triggering either when the operator falls out of spec, becomes disconnected, or ground is lost. It is a xed resistor system and is go no go, there is no calibration needed. A full time monitoring system is necessary to reduce latency on the assembly line.

Calibration:
The Botron B9201 is designed to monitor resistance of the operator's path to ground. It comes with a built in audible alarm and LED, triggering either when the operator falls out of spec, becomes disconnected, or ground is lost. It is a xed resistor system and is go no go, there is no calibration needed. A full time monitoring system is necessary to reduce latency on the assembly line.

Properties & Specifications:
Operator:
Low Fail = < 675K
Pass = > 750K to <8Meg
Fail High = >8.5Meg
+/- 10%
Size: 0.88" x 1.75" x 1.25"
Mounting: Screws on
Safe Condition: 1 Meg Ohm
Fault Condition: 6.5 Meg Ohm
Power: 110v std. 230 - opt. Power pack
Visual Alarm: Green (safe), Red (Fault)
Operation: Active when plugged in

Additional Information

PAC Part Number I138749
MFG Part Number B9201
Brand Botron
Type Dual Wire Resistance