Home > Tools > Sturtevant Richmont Torque Calibration Systems > Torq-Tronics® Digital Tester Series >

  Torq-Tronics 150, 15-150 ft.lbs./20.3-203 Nm/2074 kgf-cm, .5" F Sq.



 
Our Price: $2,058.82

Product Code: 10196-SR
Qty:

Description
 
Torq-Tronics six touch-pads access all functions, making use both quick and easy! Switching from torque wrench calibration to power tool calibration requires only adding a joint simulator and pushing the touch-pads - a two minute changeover! Stall, clutch, pulse, and electric tools can all be calibrated rapidly and reliably.
Torq-Tronics rugged design is equally at home in the lab, tool crib, or on the shop floor! Its' simplicity and efficiency enable deployment as a "line checker" at the start of each shift, or it can be used as the primary torque tool tester in the lab.
More Information
Accuracy: +/- 1% of indicated value Accuracy Range: 10% - 100% of rated capacity Accuracy Direction: Bi-directional, CW + CCW Modes: Track, Peak, Initial Peak, Power Tool Rundown Fixture: Optional for units 250 foot-pound capacity and below Display: 16-character backlit LCD, 3/8" high on 80 ft. lbs. testers and above, ¾" high in smaller testers Controls: 6 touch-pads: Zero, Clear/Print, Auto, Units, Peak Select, Filter Filter: Five user-selectable cutoff frequencies in Power Tool mode Communications: RS-232C Serial Port, 9-Pin, Baud Rate 4800, Stop Bits 1, Parity None Voltage: 120 VAC or 240 VAC, standard Voltage Converter: Standard Batteries: 4 each AA NiCd, 1000mA, 1.2VDC Charge Life: 5 Hours Full Time Charge: 20 Hours


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Tools > Sturtevant Richmont Torque Calibration Systems > Torq-Tronics® Digital Tester Series