Speak to a Production Automation Sales Representative
  • Toll Free: (888) 903-0333
  • South Central US: (800) 442-4008
  • Western US: (888) 839-3936

Simco-ION 36" ScorpION3 Ionizing Bar with 11 Tungsten Emitters

Your Price: $897.00
OR

Simco-Ion's scorpION3 Ionizing Bar is designed to meet today's requirements for cleanliness and performance for the semiconductor front-end, semiconductor back-end, and general electronics markets. It's unique combination of available air assist, "Peak-reduction" technology, numerous emitter point materials and lengths make it suitable for a wide range of applications. It can be used to reduce charge on surfaces to minimize ESD events, as well as to reduce airborne particle contamination landing on product surfaces during manufacturing.

Details

  • Air assist versions
  • "Peak-reduction" technology
  • Daisy-chain feature with "master/slave" capability

  • Input Voltage: 24 VDC, 200 mA per bar
  • Discharge: <10 sec (typ), 24" with 90 fpm unidirectional airflow
  • Balance: <30V (typ), 24" with 90 fpm unidirectional airflow
  • Output Current: <15 µA, each polarity
  • Timing: 0-10 sec @ 0.1 sec increments, adjustable
  • Connectors: 6-pin RJ-11 modular jack receptacles provide power and RS-485 communications
  • Communications: RS-485
  • Address Control: Independently digitally set to unique addresses
  • Output Control: Performance stability is maintained using real time feedback, comparison to a value stored in the bar and adjusting via a micro controller located in the bar
  • Operating Modes: Steady state DC, Pulsed DC, Peak Reduction; peak reduction overlap adjustable 0-90%
  • Mode Control: Each bar in a series can be set to operate independently or under control of a Master (Slave mode). Independent bars can be set to any operating mode
  • Fault Interface: 1/8" (3.5 mm) phone jack, opto-isolated transistor can be set to normally off or normally on
  • LED Indicators: Flash on with POS/NEG power supplies; green NORMAL & PULSE DURATION; red FAULT; communicated through RS-485 interface; rapid simultaneous flashing identifies bar address
  • Emitter Points: Replaceable Ultra-clean Silicon, CVD Silicon Carbide or Tungsten
  • Cleanliness: ISO 14644-1 Class 1 (Ultra-clean Silicon and CVD Silicon Carbide), ISO 14644-1 Class 4 (Fed. Std. 209e Class 10) (Tungsten)
  • Operating Env.: Temperature 15-35°C (59-95°F) recommended; relative humidity 20-65%
  • Ozone: <0.020 ppm
  • EMI: Below background level
  • AC Adapter: Universal 100-240 VAC 50/60 Hz input, (IEC320); powers up to 3 bars max, any length
  • Option: Air assist model available; computer interface RS-485 or Ethernet capable
  • Mounting: Stainless steel brackets, adjustable mounting centers
  • Enclosure: ABS chassis
  • Dimensions: 18, 24, 36, 44, 64, 74, 84L x 2.95H x 1.89W in. (45.7, 61, 91.4, 111.8, 162.6, 188, 213.4 x 75H x 48W cm)
  • Weight: 0.8 kg (1.8 lb), 1 kg (2.1 lb), 1.3 kg (2.8 lb), 1.5 kg (3.2 lb), 2.0 kg (4.3 lb), 2.2 kg (4.9 lb), 2.5 kg (5.5 lb)
  • Warranty: Two year limited warranty

Additional Information

PAC Part Number I126959
MFG Part Number 4011548
Brand Simco-ION
Length 36"

You may also be interested in the following product(s)

Simco-ION Periodic Verification System with 775 Compact Handheld Electrostatic Fieldmeter

Simco-ION Periodic Verification System with 775 Compact Handheld Electrostatic Fieldmeter

Your Price: $1,140.00
Simco-ION FMX-004 Handheld Electrostatic Fieldmeter with Charge Plate

Simco-ION FMX-004 Handheld Electrostatic Fieldmeter with Charge Plate

List Price: $625.00

Your Price: $587.50