TechSpray 2102-12S

Fine-L-Kote SR Conformal Coating, 12 oz. Cans

(Case of 12) Ships HAZMATThis item is classified as a hazardous material and will incur an additional shipping fee.

Silicone conformal coating provides excellent protection in a very wide temperature range. SR provides good chemical resistance, moisture and salt spray resistance, and is very flexible. Silicone conformal coating isn’t abrasion resistant because of its rubbery nature, but that property does make it resilient against vibrational stresses. Silicone coatings are commonly used in high humidity environments, like outdoor signage.

  • UL recognized (UL746E) - file #E475454
  • Thermal resistance - 392°F (200°C)
  • Dielectric strength - 1100 volts/mil
  • Moisture resistant
  • Chemically resistant
  • Vibration resistant & flexible
  • Meets IPC-CC-830B
  • Passes the laboratory tests of MIL-I-46058C. However, it is not qualified on QPL-46058
Special Price $529.20 Regular Price $540.00
  • Buy 12 for $523.80
  • Buy 50 for $518.40
  • Buy 100 for $513.00

FAQs

What does 2-step curing mean?

That just means you break the accelerated curing process into 2 stages. You basically ramp up the heat so the coating has an opportunity to level. Otherwise, you can get a wrinkling or orange peel texture. That texture doesn’t affect performance, just aesthetics. This is not an issue when curing in ambient conditions.

What is the difference between a full cure and a tack-free cure?

A full cure is when it meets all the final specifications. There might be some out-gassing, but it will be as hard as it is going to be, and adhesion is as good as it gets. Tack-free is as the name suggests, not sticky so you can move it along the assembly process.

What is the difference between dielectric strength and dielectric withstand voltage?

The dielectric strength is the material's intrinsic property and withstanding voltage is a surface property that depends on the thickness of the material. They can be slightly different for thicker materials, but for conformal coating, the two numbers should be very close or the same. That is because we test coating at 3-5 mils thickness, calculate, then report the value per mil.

*This item is hazardous and will be subject to an additional Hazmat fee

More Information
PAC Item Code I173478
MFG Part Number 2102-12S
Brand TechSpray
Size 12 oz.
You May Also Be Interested In
©Production Automation Corporation. All Rights Reserved.