Yamato Scientific DNF-401

115V Energy Saving Mechanical Convection Oven with Air Velocity Control, 3.2 Cubic Ft.

Features:

  • Eco oven with variable wind speed and adjustable damper
  • Program featured to reduce power consumption significantly
  • Improved energy saving rate of 30-40% compared to previous models
  • Superior heat tightness and insulation of chamber
  • Excellent dust tightness, dust can hardly enter the chamber
  • Air velocity changeable in 10 stages using digital setting of controller
  • Standard with 32 step program operation and Auto-stop, Auto-start functions
  • Adjustable damper position at chamber front to optimized operation
  • Fluorescent display, interactive input method, enhanced with calibration off-set function
  • Easy system upgrade with various option settings
  • Safety Features: Standard equipped with various self-diagnosis functions, independent overheat prevention device, overcurrent circuit breaker and key lock function

$6,100.00
Stand not included.

Technical Documents

  • Circulation Method: Air velocity control, Forced air circulation (with manual slide to operate the exhaust damper)
  • Operating Temp. Range: Room temp. +10°C to 260°C
  • Temp. Adjustment Accuracy: ±0.5°C (at 260°C)
  • Temp. Distribution Accuracy: ±2.5°C (max. air velocity at 260°C)
  • Max. Temp. Reaching Time: ~75min.
  • Interior/Exterior Material: Stainless steel SUS 304/Electro-galvanized steel sheet with epoxy and melamine resin baking finish
  • Heater: 1.25kW
  • Fan Type/Fan Motor: Scirocco fan, DC24V, brushless motor (800~1500rpm) variable type (10 steps), 30W
  • Damper: Sliding opening and closing adjustment knob at the front of main unit
  • Cable Hole: 30mm I.D. (on the right side) 1 pc.
  • Air In-take Hole: 30mm I.D. (on the right side) 1pc.
  • Exhaust Port: 50mm I.D. (backside)
  • Temp. Controller: PID control by microprocessor
  • Temp. Setting Method: Digital setting by UP/DOWN key
  • Temp./Info Display: Digital display by orange LED (4 digit)/ fluorescent display
  • Timer/Min. Division: 0 min. to 999 hours 59 minutes/1 minute
  • Operation Function: Fixed temperature operation, Program operation, Auto-start, Auto-stop
  • Program Mode: Program operation, Maximum 32 steps, Repeat function
  • Additional Functions: Timer, Integration time function (max. 49,999 hrs.) calibration offset function, time display
  • Heater Circuit Control/Sensor: Triac zero-cross control/K-thermocouple
  • Safety Device: Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Main relay abnormal, Automatic overheating prevention), Key lock function, Independent overheat prevention, Electric leakage breaker with over current protection
  • Internal Dimensions (W x H x D mm): 450 x 450 x 450
  • External Dimensions: 580 x 646 x 860
  • Internal Capacity: 90L
  • Shelf Plate with Standard Load: ~15kg/piece
  • Shelf Rest Step Number/Shelf Rest Pitch: 11 steps/30mm
  • Power Source (50/50Hz): AC115V 13A (15A)
  • Weight: 61Kg
  • Shelf Plate: Stainless steel, 1 pc. on the bottom screwed (DNF910, 2 pcs)
  • Shelf Plate/Bracket: 2 pcs./4 pcs.

More Information
PAC Item Code I347638
MFG Part Number DNF-401
Brand Yamato Scientific
Capacity 3.2 Cubic Ft.
Temperature Range 10° to 260°C
Input 115V
Type Forced Air
©Production Automation Corporation. All Rights Reserved.