MBT 250 SDTP SensaTemp® 3-Channel 115V Digital Rework & Repair System

The PS-90 Universal Soldering Iron is excellent for general purpose and heavy-duty soldering and SMT rework operations where high thermal capacity and flexibility are required. The Iron provides a wide range of SMD and Thru-Hole installation and removal capability as well as unsurpassed thermal performance on heavy, multilayer Thru-Hole assemblies at safe, lower working temperatures. A variety of 3/16" shank, quick change thru-hole and SMD tips, for chip components, SOT's, SOIC's and other components.

The clog-free SX-100 Sodr-X-Tractor® is the best performing solder extraction tool on the market today. The handpiece can be used with a disposable Sodr/Flux-Trap paper solder collection chamber or re-cleanable glass chamber. When the filter is full, just pull out the chamber, pop out the old filter and replace with a new one. The heater's laser-trimmed, Platinum RTD temperature sensor is 5 times more accurate than conventional thermocouples. The widest range of standard, precision & long-reach desoldering tips are available, including 2 and 4-sided Pik-Tips, & Flo-D-Sodr® desoldering tips available for safe removal of excess surface solders and BGA pad clean-up.

The TT-65 ThermoTweez Thermal Tweezer provides safe, one-handed, rapid reflow & component removal of PLCCs & other 4 or 2 sided SMT components. Unlike other methods, its high thermal capacity and targeted heat delivery remove even the largest SMDs in just seconds without damaging the PCB or risking adjacent component reflow, even on heavy assemblies. The patented vertically oriented handpiece and a wide variety of quick-change, slim-line tips easily reach into the tightest spaces for fast, safe component removal. The TT-65 also features a patented "stroke" adjustment to reduce hand fatigue for repetitive operations.

The TP-65 ThermoPik with vacuum pick-up provides safe, rapid reflow and removal of a wide variety of QFPs and flatpacks. Its high thermal efficiency design targets controlled heat right at the joints, away from sensitive components and substrate areas. The TP-65's self-adjusting, integral vacuum pick with finger switch actuator provides for easy & one handed operation.

Features

• Proven system reliability, longevity, durability & sustainability.
• Digital readout displays the selected channel's set & actual temperature back and power down, constant memory.
• Automatic tip offset compensation system.
• Can powers 3 separate handpieces simultaneously & at different temperatures.
• SensaTemp® temperature management system continuously monitors/responds to thermal load.
• Auto-Off™ and temperature setback preserves tip life.
• Tip temperature offset for high mass tips.
• Password protection prevents unauthorized changes.
• User definable temperature operating range.
• The power supply is self-contained, no shop air required, just plug it in.
• Includes 4 tips & tool stands with low abrasive dry wipe capability.
• Dual purpose vacuum/pressure pump includes patented Snap-Vac® technology.
• Completely ESD/EOS Safe & lead-free compatible.

Specifications

• Power Requirements: 115VAC, 60Hz, 184 Watts maximum
• Handpiece Specs: SensaTemp® Only
• Tip to ground resistance: 2.0 ohms or less
• Temperature stability: 1.1°C (° 2°F) at idle from set tip temp.
• Tip Temperature Range: 38° to 482°C (100° to 900°F) nominal
• Vacuum Rise Time: Evacuates 33cc (2.0 cubic inch) volume to 25cmHg. (10in Hg.) in 150ms.
• Pressure: 0.48 Bar (7.0 p.s.i.) nominal at maximum setting
• Airflow: 9.0 SLPM (0.32 SCFM) maximum