M+A Matting 781

Corrugated Switchboard Non-Conductive Mat, Black

Free ShippingThis item will ship for free only within the continental United States, unless otherwise specified. Minimum order requirements may apply, click the icon for details.

As low as $949.95

Switchboard mats are non-conductive mats designed for use in high voltage areas. Corrugated Switchboards are designed to protect workers from electrical shock by insulating against high voltage.

  • Type II, Class 2 (meets additional testing for flame, oil, and ozone resistance)
  • Conforms to ASTM D-178-01 testing
  • Tested dielectric strength is 30,000 volts
  • Maximum use voltage is 17,000 volts
  • 1/4", non-conductive

Technical Documents

Select your Configuration

* Required Fields

Your Configuration
Andersen 781 Corrugated Switchboard Non-Conductive Mat, Black
Corrugated Switchboard Non-Conductive Mat, Black

In stock

$949.95

Summary

    Specifications

    Material: PVC (vinyl)

    Thickness: 1/4 inch (0.25")

    Standards & Testing:

    • Passes electrical proof test ASTM D178 (Min. 20,000 V for one minute)
    • Passes dielectric breakdown test ASTM D149 (Min. 30,000 V)
    • Passes O3 resistance test method B ASTM D178 (any visual degradation)
    • Tensile strength ASTM D412 DIE C (Minimum 700 PSI): 1,318 PSI, PASS
    • Elongation ASTM D412 DIE C (Minimum 250%): 317%, PASS
    • Tension set ASTM D412 DIE B (Maximum 0.50 in.): 0.4827 in., PASS
    • Moisture absorption ASTM D570 (Maximum increase 3%): 0.09%, PASS
    • Accelerated aging ASTM D573 (Minimum 50% of original tensile strength): 1,363 PSI (103% of original tensile strength), PASS
    • Flame resistance ASTM D178 Appendix (Maximum 0.5 in./12.7mm after 30 seconds): 0.12 mm/s, PASS
    • Oil resistance ASTM D471 (Maximum volume increase 4%): 0.04%, PASS

    Cleaning Instructions

    Switchboard mats can be cleaned by scrubbing with a deck brush (when needed) using detergent with a neutral pH, and rinsed with a hose or pressure washer. Mats should be laid flat or hung to dry.

    More Information
    PAC Item Code K100721
    MFG Part Number 781
    Brand M+A Matting
    ESD Properties Non-Conductive
    Thickness 1/4"
    Surface Ribbed
    Material PVC
    Color Black
    You May Also Be Interested In
    ©Production Automation Corporation. All Rights Reserved.