Microluxx™ Dust Control Indoor Wiper Mat
As low as $0.00
MicroLuxx mats feature traditional nylon fibers blended with finer denier fibers that work together to absorb more moisture than standard mats.
- Superior Moisture & Dust Control - Unique "microfiber" blend absorbs and retains 2.5 times more moisture and dust than standard carpeted mats
- Resilient - High-twist, heat-set nylon resists crushing to better trap dirt and extend the useful life of the mat
- Fade Resistant - Solution-dyed nylon is resistant to fading and impervious to bleach
- Safe - Certified high-traction by the National Floor Safety Institute (NFSI)
- Commercially launderable
- Available in 6 colors on durable nitrile rubber with smooth backing to ensure the mat stays in place on your floor
Recommended Uses
Recommended for indoor use at commercial entryways, in lobbies or any interior location where additional traction or moisture control is needed.
Mat Sizes
Please note, mat sizes are approximate as rubber shrinks and expands in conjunction with temperature and time. Tolerable manufacturing size variance is 3-5%.
Specifications
Surface:
Material: 900 denier/128 filament 3-ply solution-dyed type 6 nylon
Construction: Cut pile
Weight: 33 ounces/yard2
Substrate: Freudenberg LUTRADUR polyester spunbond non-woven fabric (3.8 ounces/yard2)
Backing:
Material: Nitrile rubber (smooth)
Thickness: Standard 52-mil (body thickness 52-mil; border thickness 94-mil)
Standards & Testing:
- Certified high-traction by the National Floor Safety Institute (NFSI)
- Passes flammability standard DOC FF1-70
Cleaning Instructions
MicroLuxx mats can be cleaned in several different ways.
- They can be commercially laundered (see Laundering Instructions)
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications),
- Cleaned with an extractor and laid flat to dry.
Mats should always be dry before they are placed back in service, and cooled before rolling.
Laundering Instructions
MicroLuxx mats that are backed with nitrile rubber can be commercially laundered. Proper laundering will prolong the life of the mat by preventing the buildup of soil and soap residue. For heavy soil, increase temperature to max 140°F (60°C). Break should not exceed pH of 9.5; use low pH non-ionic detergents.
- Flush 2-3 minutes, medium water level, 120°F (49°C)
- Flush (optional) 2-3 minutes, medium water level, 120°F (49°C)
- Break 2-3 minutes, high water level, 120°F (49°C)
- Rinse 2 minutes, high water level, cold
- Rinse 2 minutes, high water level, cold
- Extract (low speed) 1-2 minutes
- Shake out (rotate wheel at wash speed with drain open) 1 minute
- Extract (low speed) 3-5 minutes
- Dry 5-10 minutes, 180°F (82°C) basket temp.
- Cool down 5 minutes
- Lay mats flat following removal from washer or dryer. Allow to cool before rolling.
Do not over-dry mats; basket temperature of dryer should not exceed 180°F (82°C). If mats are not dried, final rinse can be increased to 140°F (60°C). This will reduce moisture retention following extraction.
| PAC Item Code | K102301 |
|---|---|
| MFG Part Number | 1201 |
| Brand | M+A Matting |
| Length | Custom |
| Color | Black, Gray, Brown, Red, Blue |
-
Floor Tape & Signage
Floor signage increases productivity and worker safety. -
Chairs & Seating
Choose from Industrial, ESD, Cleanroom or Lab Chairs & Stools. -
Ergonomic Accessories
Additional accessories that promote good ergonomics. -
Wire Shelving
Open wire shelf design helps facilitate air flow in clean environments. -
Workbenches
Browse hundreds of laminate, frame options, and accessories.
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.