Speak to a Production Automation Sales Representative
  • Toll Free: (888) 903-0333
  • Hablamos Español: (844) 903-0333
  • Contact Sales: [email protected]

BenchPro™ H-Series Heavy Duty Workbenches

BenchPro H-Series Heavy Duty Workbench with Accessories
BenchPro Workbenches

BenchPro™ Heavy Duty Workbenches (H-Series)

BenchPro™ H-Series heavy duty workbenches can hold up to 20,000 lbs!

Image shown with these standard features:
(1) Solid 2.5" thick top.
(2) 2" x 3" rectangular tube frame.
(3) 3", 14 gauge tubular steel legs.
(4) Leveling floor glides with optional casters.

Many accessories available. See below for workbench assembly instructions.
Request a Free Quote or Shop Online. Begin by choosing a work surface:
Formica Laminate Worksurfaces
ESD Laminate Worksurfaces
Cleanroom Laminate Worksurfaces
Phenolic Resin Worksurfaces
Stainless Steel Worksurfaces
Butcher Block Worksurfaces

Formica™ Laminate

Formica™ is the heaviest grade laminate available today and used in all standard applications.

ESD Laminate

ESD Laminate is used for applications where delicate electronics could be damaged by static charge.

Cleanroom Laminate

Cleanroom Laminate is sealed on all sides to reduce contamination and is rated for Class 100 environments.

Phenolic Resin

Phenolic Resin is durable nonporous, making it moisture and chemical resistant and easy to clean.

Stainless Steel

These worksurfaces have a particle board core wrapped in 18 gauge type 304 brushed stainless steel.

Butcher Block

Butcher Block worksurfaces are recommended where heavy use requires a durable material.

BenchPro™ is the only national workbench manufacturer that welds the frame together and assembles it to the top.

1. Place your new workbench on top of a table with the cardboard seam facing up. Open the carton. Do not remove the cardboard yet - this prevents the work surface from scratching.

2. Position the legs. If you have a lot of benches to assemble, we recommend two man teams. If you have ESD benches, make certain the wrist strap jack is on the front side of the leg.

3. Insert both screws with lock washers into each leg.

4. Tighten until lock washers are flat. They don't have to be tighter than that.

5. Assembly any accessories. When you're done, you can turn the bench over. For your safety, we recommend two people. Please recycle the cardboard.