Dry Fog Systems

Dry foggers fast-track decontamination procedures in cleanrooms, laboratories, and healthcare facilities.

Sanitize Previously Impossible Surfaces

Biological decontamination by hand is time-consuming and subject to human error. Dry fogging penetrates normally inaccessible areas resulting in a more thorough stericidal decontamination. Dry foggers produce droplets as small as 7.5 microns which reduce condensation, surface wetting, and possible corrosion. Area coverage is more uniform and the fog penetrates cracks, crevices, ventilation systems and other challenging areas like high corners and underneath furniture.

Dry Fog Droplet Action Fine Mist Droplet Action

Clean-Forward Construction

Titanium and 316L stainless steel components allow rapid setup and breakdown for autoclave sterilization. The portable system is easily used in multiple locations. Specially formulated cold sterilants neutralize spores, bacteria, mycobacteria, yeast, molds, and viruses without applying heat. Its sanitary and autoclavable design permit use in the most critical areas and maintain the utmost levels of sterility. Beyond biotechnology, pharmaceuticals, and other controlled environments, cleanroom dry foggers also curb bio-burdens within agricultural, beverage, and food processing applications.

Safe and Environmentally-Friendly

An aldehyde-free formulation prevents toxic exposure to aldehyde vapors and poses no threat to municipal waste treatment systems. While it should be handled with care in its concentrated form, it doesn't require extraordinary handling procedures or ventilation systems. It is completely biodegradable, does not produce toxic vapors, and will decompose into oxygen, water, and acetic acid. Acetic acid is the active ingredient in vinegar.

Browse Sterilants Specifically Developed for Dry Fogging SystemsShop Now

Wireless Ready with Vapor Detection Systems for Safe Use

The optional wireless remote control unit allows the operator to turn the system on and off from outside the cleanroom. A vapor detection system remotely alerts an operator once the room has reached safe air quality levels for reentry.

Every Cleanroom Application is Unique

Our dry foggers provide economical fogging solutions for smaller facilities of up to 900 sq. ft. and full-scale systems for facilities as large as 35,000 sq. ft. Every cleanroom application is different. Because these systems improve outcomes for operators and environments, they are used in limitless applications from agriculture and food processing to sterile bio-medical environments.

We offer two different dry fog systems, depending on the size and accessibility of the application.

Minncare Dry Fog 2S

Minncare Dry Fog System

The Minncare Dry Fog system provides an easy-to-use, high-technology solution for rooms up to 35,000 sq. ft., and was designed specifically for use in pharmaceutical cleanrooms.

  • Dry Fog Technology validated by hundreds of FDA-audited pharmaceutical facilities worldwide.
  • Controlled and consistently accurate droplet size minimizes the risk of condensation and ensures penetration of sterilant into normally inaccessible areas
  • Effective dispersion in all areas of rooms 1,000 cubic meters using a single unit
  • 8 different spray nozzles position possibilities for higher flexibility. Spray diffusion is horizontal or vertical.
  • Robust construction with easy maintenance and no moving parts
  • Does not require an electrical connection
  • Sanitary construction using 316L stainless steel for key components
  • 100% autoclavable design
  • Over 95% faster than some conventional systems
  • Portable system can easily be used in multiple locations
  • Substantially lower cleanroom downtime
  • Validated reproducible procedure according to international Pharma Standards
  • Extensive document package and traceability on key parts
Minncare Dry Fog Mini

Minncare Mini Dry Fog System

The Mini Dry Fog system is designed for confined-space fogging. The flexibility of the Mini Dry Fog nozzle allows for rapid vapor dispersion, and ensures the entire space is exposed to dry fog.

  • Single units are suitable for use in volumes up to 20 m3, or a 700 ft3 room, and will disperse up to 500 ml of liquid sterilant.
  • Eliminates formaldehyde disinfection procedures
  • For use in biological safety cabinets, cRABS, glove boxes, pass-through rooms, and ambulances; the system can be easily built into small cabinets as an inexpensive alternative to H2O2 vaporization systems.

Things to Consider Before Deploying a Fogging System

The size, geometry, and decontamination standards of your facility require consideration. A dry fogging concentration must remain below the dew point, which prevents condensation and micro-condensation. Air currents, humidity, and ventilation systems provide subtle cues about the fogger coverage, efficacy, and placement. The most cost-effective and least laborious solution is the one that provides an appropriate degree of decontamination with the least amount of equipment. Speaking with a specialist is beneficial.

Are You Interested in a Dry Fog System for Your Facility?

PAC GCLID:    
Lead Source:    
Source Page:    
Source Website: *    
First Name: *    
Last Name: *    
Email: *    
Phone Number: *    
Company Name:    
Shipping Address:    
City:    
State:    
Zip:    
Additional Details:    

Submit your contact info, and a dry fog expert will contact you shortly. Your information is private and will not be shared or used for marketing purposes.