BenchPro™ K-Series Workbenches

Get 15% Off any Anti-Fatigue Mat or Lissner Brand Chair when You Buy a BenchPro Workbench
BenchPro K-Series 4-Leg Workbench with Accessories BenchPro Logo

BenchPro™ K-Series workbenches feature a 4-corner leg design that can hold up to a 6,600 lb. load!

Image shown with these available options:

  1. Dust and explosion-proof light and bracket mounts
  2. Standard adjustable top shelf
  3. Adjustable bin box rail
  4. UL listed power strips available in many lengths & designs
  5. Adjustable footrest
  6. Chrome plated leveling floor glides with optional casters
  7. 500 lb. capacity upright sets
  8. Rounded front surface edge for user comfort
  9. Solid stainless steel trim strip
  10. Solid stainless steel drawer pulls
  11. Drawers with full extension chrome plated ball bearing slides

Additional accessories are also available. See below for workbench assembly instructions.

Shop Online by Work Surface

Formica Laminate Work Surface

Formica™

Formica™ is the heaviest grade laminate available today and used in all standard applications.

Select
ESD Laminate Work Surface

ESD Laminate

ESD Laminate is used for applications where delicate electronics could be damaged by static charge.

Select
Cleanroom Laminate Work Surface

Cleanroom Laminate

Cleanroom Laminate is sealed on all sides, and is rated for Class 100 (ISO Class 5) environments.

Select
Phenolic Resin Work Surface

Phenolic Resin

Phenolic Resin is durable nonporous, making it moisture and chemical resistant and easy to clean.

Select
Stainless Steel Work Surface

Stainless Steel

These worksurfaces have a particle board core wrapped in 18-gauge, type 304 stainless steel.

Select
Butcher Block Work Surface

Butcher Block

Butcher Block worksurfaces are recommended where heavy use requires a durable material.

Select

Kennedy Series Workbench Assembly Instructions

BenchPro™ is the only national workbench manufacturer that welds the frame together and assembles it to the top.

1. Place your new workbench on top of a table with the cardboard seam facing up. Open the carton. Do not remove the cardboard yet - this prevents the work surface from scratching.

2. Position the legs. If you have a lot of benches to assemble, we recommend two man teams. If you have ESD benches, make certain the wrist strap jack is on the front side of the leg.

3. Insert one screw with lock washer into each leg.

4. Tighten until lock washer is flat. It doesn't have to be tighter than that.

5. Assembly any accessories. When you're done, you can turn the bench over. For your safety, we recommend two people. Please recycle the cardboard.