Speak to a Production Automation Sales Representative
  • Toll Free: (888) 903-0333
  • Hablamos Español: (844) 903-0333
  • Contact Sales: [email protected]
CleanPro 12100

NCR MicroSound Fan Filter Unit with HEPA Filter, 115V, 2' x 2'

MicroSound Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned. Housings are fabricated from steel with a white powdercoat finish and include seismic clip suspension points.

The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) and 277 Volt (60 Hz).

Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.

Your Price: $600.00


  • NCR Style Filter Data: The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille.
  • Final filters can be replaced by removing unit from ceiling, placing on a bench, removing and replacing the filter and re-installing unit in ceiling.
  • Low Profile: All SAM MicroSound NCR Style Models are 12-5/8" high.
  • Air Flow: Airflow ranges from 250 to 400 CFM for a 2' x 2' unit. At 90 FPM, CFM is nominal 300 on a 2' x 2' unit. Airflow for units running at 50 Hz will be about 20% less.
  • Sound Level: At average face velocity of 90 FPM measured 30" from face of filter, sound level is approximately 54 dba with less than 45 dba ambient sound level. Field conditions, voltage and method of testing could produce different results.

Additional Information

PAC Part Number I104068
MFG Part Number 12100
Brand CleanPro
Shipping Weight 53.0000
Width / Depth 2'
Length 2'
Type MicroSound NCR
Input 115V
Output 250-400 CFM
Includes Filter
Notes UL Listed

You may also be interested in the following product(s)

Duct Collar Adapter, 10"

Duct Collar Adapter, 10"

Your Price: $45.00
Duct Collar Adapter, 12"

Duct Collar Adapter, 12"

Your Price: $45.00
Powder-Coated Steel Sheet Rock Adapter, White, 2' x 2'

Powder-Coated Steel Sheet Rock Adapter, White, 2' x 2'

Your Price: $112.50