Speak to a Production Automation Sales Representative
  • Toll Free: (888) 903-0333
  • Hablamos Español: (844) 903-0333
  • Contact Sales: [email protected]
Desco 50568

ESD Survey Kit, includes NIST Certificate

19787 Digital Surface Resistance Meter Kit Includes:
• 1 Digital Surface Resistance Meter
• 2 Shielded Test Leads, 5' Length
• 2 Five Pound Electrodes
• 2 AA Alkaline Batteries
• 1 Gator Clip
• 1 Plastic Carrying Case
• 1 Certificate of Calibration

Enclosure with Rubber Grip Edges
• Thinner and narrower design is easier to hold and provides protection from drops.

Quick Check Button
• Bypasses the 15 second electrification period to allow quick spot checks.

Battery Compartment
• Easy-to-access compartment without the need for tooling or probes.

Digital Compliance Verification Surface Resistance Meter Kit
• Measures resistance point-to-point(Rtt) or surface to ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1 and other documents.

Resistance Range: Greater Than 1.0 x 103 ohms to Less Than 1.0 x 1012 (+/-10% Accuracy)
• Determines if a surface is dissipative, conductive, or insulative for ESD control applications in electronics manufacturing or handling environments.

Under Load Test Voltages (10V or 100V +/-5%)
• Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification.

Selectable Test Voltage
• Switches to appropriate test voltage (10V for tests <1 x 106 or 100V for tests >1 x 106) in AUTO mode or may be fixed to at 10V in HOLD mode.

Ohm Values are Expressed with a Digital Mantissa and LED Exponent
• Provides an easy to read and accurate measurement.

Pre-set 15 Second Electrification Period in Full Test Mode
• Meets the requirements of the ANSI/ESD S4.1 testing requirements.

Temperature (Fahrenheit and Celsius) and Relative Humidity Measurements
• Measures temperature and relative humidity (during 15 second electrification period) as required by ANSI/ESD S20.20.

NIST Calibrated with Certificate
• Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.

Your Price: $2,888.52

Additional Information

PAC Part Number I309872
MFG Part Number 50568
Brand Desco
Shipping Weight 28.2000
Includes NIST Certificate