Foamtec

PharmaMOP® Mop System

Stocked Sizes

As low as $674.49

PharmaMOP® is designed for cleanroom cleaning SOP's. The light weight, 360° rotating and locking mop head give operators excellent control cleaning floors, walls and ceilings. The ultra-light handle, wringer less bucket system and drip resistant mop heads allow operators to efficiently carry out SOP's with improved ergonomics. PharmaMOP® can be used with figure eight, front to back or top to bottom motions and the rotating mop frame enable cleaning of tight spaces. The PharmaMOP® handle and SingleSTEP™ mop heads have been designed to allow for greatly improved cleaning efficiency of soils and residues from difficult to clean textured floors while at the same time allowing ease of mopping. The entire PharmaMOP® system is compatible with steam sterilization and all of the major disinfectants.

PharmaMOP® mop heads are constructed with a foam core sandwiched between two layers of cleanroom fabric. The fabric is ultrasonically welded around the perimeter to guard against fiber contamination. PharmaMOP® mop heads are produced on a fully automated production line in an FDA licensed ISO class 8 clean room and are designed to meet cleaning and disinfection SOP's in cGMP facilities. Compatible with bleach, peracitic acid, phenolics, Quat and IPA based disinfectants and sanitizers. PharmaMOP® mop heads are available gamma irradiated with a SAL 10-6 for use in aseptic processing areas. All mop heads are individually packed and double bagged to ensure compliance with cleanroom procedures.

PharmaMOP® Handle Advantages

  • 360° Swivel. A two direction 360° swivel and mop head with a 1.5" low profile design enables unsurpassed access to tight spaces reducing uncleanable dead spots.
  • All Surface Design. An all surface, large area design, compatible with pull and figure eight motions, simplify SOPs and reduce costs by eliminating the need for multiple mop types.
  • Improved Ergonomics. An ultra-lightweight telescoping handle and extensions reduce operator fatigue and cleaning time for high spaces.
  • No Wringer Required. Designed to work without complex wringers that are prone to rust.

Technical Documents

Select your Configuration
PharmaMOP® Aluminum Mop Handle with Lever Lock & 16" Frame, 36"-61" Long   + $77.14

* Required Fields

  • Buy 2 and save 4%
Your Configuration
Foamtec FT416D PharmaMOP® Aluminum Mop Handle with Lever Lock & 16" Frame, 36"-61" Long
PharmaMOP® Mop System

In stock

$674.49

Summary

    PharmaMOP® Mop Head Advantages

    • Drip Resistant. Wringerless Design. PharmaMOP® mop heads are designed so operators can adjust saturation levels without a mechanical wringer.
    • Ease of Use. PharmaMOP® mop heads enable operators to meet disinfectant contact times without suffering dripping and weight penalties so typical with clean room mops.
    • Available Gamma Irradiated. Certified 10-6 SAL in a ISO 9001:2000 & 13485:2003 certified facility for use in aseptic processing areas.
    • Robust Cleaning and Disinfection. PharmaMOP® mop heads are available with a unique hybrid microfiber fabric which enable robust removal of soils while simultaneously meeting disinfectant contact times.

    Foamtec FS853 PharmaMOP® Polyester Mop Head

    PharmaMOP® Head for application of standard volumes of disinfectant cleaners to ceilings, walls and floors. Polyester over foam construction provide abrasion free mopping for ISO Class 1-7 cleanrooms.

    Foamtec FS859 PharmaMOP® Polyester/Microfiber Ribbed Mop Head

    Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors.

    Foamtec FS856 PharmaMOP® Polyester Mop Head with High Fluid Capacity

    PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms.

    Foamtec FS853ST PharmaMOP® Sterile Polyester Mop Head

    Sterile PharmaMOP® Head for application of standard volumes of disinfectant cleaners to ceilings, walls and floors. Polyester over foam construction provide abrasion free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.

    Foamtec FS859SH PharmaMOP® Polyester/Microfiber Foam Head with Sahara™ Foam Strips

    A Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric over a Sahara™ foam core with strips of Sahara™ foam on the front and back end to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. This mop is designed for weekly super cleans where it is important to strip heavy soils and residues from floors, walls, stainless steel and windows.

    Foamtec FS856ST PharmaMOP® Sterile Polyester Mop Head with High Fluid Capacity

    Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.

    Foamtec FS859ST PharmaMOP® Sterile Polyester/Microfiber Ribbed Mop Head

    Sterile Polyester/Microfiber PharmaMOP® head with a textured, ribbed fabric to enhance cleaning performance while allowing for even application of disinfectants to clean room surfaces. The textured fabric is ideal for removing residues and soils from glass and stainless steel. The ribbed shape allows for easy gliding even on textured floors. Gamma irradiated to SAL 10-6.

    Foamtec FS856EN PharmaMOP® Polyester Mop Head with High Fluid Capacity & EZGlide™ Edge

    Sterile PharmaMOP® Head for application of large volumes of disinfectant cleaners to ceilings, walls and floors. Ideal for meeting extra-long contact time requirements to control spores. Polyester over foam construction provide abrasion-free mopping for ISO Class 1-7 cleanrooms. Gamma irradiated to SAL 10-6.

    Foamtec FS858EN PharmaMOP® MiraWIPE® Microfiber Mop Head with High Fluid Capacity & EZGlide™ Edge

    PharmaMOP® Head constructed with clean-room micro fiber fabric over foam for removing heavy residues from aseptic processing areas. Ideal for SOPs designed to remove bleach and sporicide residues.

    More Information
    PAC Item Code K102124
    Brand Foamtec
    Cleanroom-Safe Yes
    ©Production Automation Corporation. All Rights Reserved.