IDP-STAT® Dissipative Cleanroom Table Mat

The IDP-STAT 5500 series utilizes a patented inherently static dissipative polymer alloy system to provide clean, permanent ESD protection. The IDP-STAT 5500 series provides consistent static dissipation that is not dependent on humidity and will last the life of the mat.

The 5500 series ESD control mats are ultra-clean:

• Non-outgassing, non-blooming
• Contains no particulates, plasticizers or phthalates
• Permanently anti-static

With minimal cleaning requirements, the IDP-STAT material is ideal for cleanroom settings. Engineered with superior durability and see-through clarity, the IDP-STAT 5500 is an ideal material for softwall panels to separate working areas in controlled environments such as cleanrooms and data centers.

Applications:

Ideal for use in controlled environments such as cleanrooms. Creates an ultra-clean ESD-Safe work area by grounding for electrical charges as well as protecting the work surface from damage.

Ready-Made ESD Worksurface Mats:

The 5500 series is available in rolls or pre-cut mats that are packaged individually with 10mm snaps and a common point ground cord.

All pre-cut ESD rubber mats come with a grounding hardware: a common point ground cord and 2 grounding snaps. Our low profile common point ground cord has two banana jacks which provide a ground point for two wrist straps.

Extremely Durable Cleanroom ESD mat kit:

The 5500 series mats are ultra-low outgassing, non-blooming and do not produce particles so it will not contaminate products in cleanrooms and other sensitive environments making it cleanroom compatible.

The mats are good for harsh process because they are Class 1 fire rated. They meet BFPA 76 and ASTM E-84 standards.

ESD Protection According to Industry Standards:

The procedures follow ANSI/ESD STM7.1 for Flooring and ANSI/ESD S4.1 for Table Tops. The Resistance-to-Groundable Point test (used for both methods) uses a resistance meter and 5 lb. weighted probe on the center of the mat and measures resistance from the probe to the button snap. The requirement is <1x10⁹ ohm. The MT5500 Series mats pass this requirement.

• Color: Transparent
• Surface: Smooth
• Material: Patented Static Dissipative TPU Alloy
• Purpose: Cleanroom Compatible ESD Table Mat.
• Thickness: 1mm (0.040 Mil)
• Resistance: 5 x 10⁸ohms
• Size: 2' x 4', 3' x 4', 3' x 6', 4' x 5', 4' x 150'
• Volume Resistivity: 5x10⁸
• Charge Decay: 0.01 Seconds (+5000V to 50V), 0.01 Seconds (-5000V to -50V), 0.1 Seconds (+1000V to 100V)

How ESD Table Mats Work:

An ESD mat is a very important part of an ESD protected area. ESD mats are designed to eliminate static on its surface and of objects placed upon it. It does this by having a conductive material embedded within the mat that collects the static and sends it to ground (earth). This is usually accomplished by connecting the mat to ground (typically the center screw of an outlet) with a ground cord. It's important to discharge at a slow rate, therefore a resistor in the ground cord is recommended.

SD table mats should have an electrical resistance of less than 10⁹ ohms. Testing your ESD mat regularly ensures that your workspace is free of damaging electrostatic charges. Test the resistance of the mats with a Surface Resistance Meter.