Digital Stirring Hot Plate with Ceramic Top, 12" x 12"
Heat, stir, and time accurately with the most easy-to-use, fully-featured hot plates available anywhere. All units are supplied with a stainless steel immersion probe. These were designed to be the easiest to use and most accurate stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100-ohm platinum RTD sensor and measurement system. Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.
The chassis is cast aluminum and designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy-based paint for durability. We offer two different heater top materials: ceramic glass and milled-flat cast aluminum.
Ceramic glass tops have a maximum plate surface temperature of 450ºC. They heat and cool very quickly. They are designed for heating a solution in a vessel, and they are very chemically resistant.
Features
- Extremely easy use by anyone in your lab
- Platinum RTD temperature measurement for precision and accuracy
- Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Heat to 450 centigrade maximum
- Cast aluminum-framed ceramic heater top edges stay cooler to prevent burns
- PID temperature control for exact, tight sample control of plate or solution
- Temperature ramping for exact heating and cooling rates
- Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
- Electronic calibration stored in the chip. No batteries to replace
- Strong motor and magnet for stirring most samples
- Full-featured digital display for checking all parameters instantly
- Fused for safety
- UL, CSA, and CE certified
Applications
- Removal of Oxides from metallic powers
- Making culture media
- Electrochemistry
- Catalysis research
- Leaching studies
- Corrosion testing
- Dissolutions
- Blending petrochemical products
- Gas solubility in organic solvents
- Precise control of polymerization reaction
- Acid bath removal of thin films optical coatings
- Digestions of plant tissue samples for assay of organic elements
Specifications
Temperature Measurement
- Platinum RTD: 100 ohm, in plate and in probe
- Readability: 1°C
- Temperature control type: PID
- Temperature Range: 0°–450°C
- Temperature accuracy: 1%
- Temp stability: 1°C
Stirrer
- Speed Range Unloaded: 100–1500 rpm
- Capacity: 10L
- Readability: 10 rpm
- Settability: nearest 10 rpm
Electrical
- VAC: 115 VAC, 50/60 Hz (230 VAC available upon request)
- Fused: Yes
- Line Cord: Detachable, 6 foot (1.8 meter), three-wire, grounded
Dimensions
- Hot Plate Dimensions: 30.48cm x 30.48cm
- Ceramic Top Weight (unpacked): 18lbs
| Unidad de venta | cada uno |
|---|---|
| SKU | I174019 |
| Modelo del fabricante | HS51 |
| Marca | Torrey Pines Scientific |
| Superficie | Ceramica |
| Ajuste | Digital |
| Entrada | 115V |
| Tipo | Agitador de placa caliente |
