Desco
19271
X3 Combo Tester with Stand
Disponible
- Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms1: Determines that the operator’s personal grounding devices (wrist straps2, foot grounders, ESD shoes, smocks3) are functioning correctly.
- Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds: Reduces time spent testing personal grounding devices used in ESD Control Plans
- Solid-State Test Switch with No Moving Parts: Maintains accuracy of tests and extends the lifetime of the tester
- Split Foot Plate for Testing Foot Grounders (or ESD Shoes): Tests both foot grounders independently at the same time
- 30 Volt Test Signal: Provides accurate tests that are not humidity dependent
- Relay for Use with Automatic Doors or Other Locking Systems: Controls access to ESD Protected Areas
- Heavy Gauge Grey Powder-Coated Stand: Allows the Combo Tester X3 to be set up in a convenient area for the testing of operators
- Compatibility with ESD Glove Test Fixture: Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
- Calibration Verification: Use the EMIT 50424 Limit Comparator to check the test limits of the Combo Tester X3 without removing it from the workplace
- NIST Calibrated with Certificated Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
- 100-240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, the United Kingdom, Japan, Asia, and Europe
- Made in the United States of America
USD 1,342.50
1Default test limits are listed. Additional test settings are noted in the technical bulletin.
2The Combo Tester X3 can verify both single-wire and dual-wire wrist straps.
3The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 107 ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.
| Unidad de venta | cada uno |
|---|---|
| SKU | I221793 |
| Modelo del fabricante | 19271 |
| Marca | Desco |
| ESD certificado | Sí |
| Tipo | Probador combinado |
| Incluye | Certificado NIST |
¡Hemos encontrado otros productos que le pueden gustar!
Productos relacionados
Compruebe los artículos para añadir al carrito o
Newsletter
Regístrese a nuestro boletín electrónico para ser el primero en conocer los nuevos productos, promociones y noticias de la industria.
Regístrese