Made to Order Cleanroom Packaging
CleanPro® is dedicated to continuous improvement by striving to exceed customer expectations by providing cost effective packaging solutions, value-added services, and on-time delivery of quality products in compliance with customer requirements.
Cleanroom Packaging can be supplied in both roll-stock and finished cleanroom bags, in widths ranging from 2" to 80" lay flat (gusseting may be required).
Cleanroom Bags are available from 1" long to any required length. Roll-Stock is supplied in 500 foot lengths, unless otherwise specified or requested.
Custom Options are available, including hole punching and perforations. "Bags-on-a-roll" can be created in custom sizes and used with or without an AutoBag machine.
Cleanliness
100% "No Regrind" Guarantee!
CleanPro® film & bags never use recycled, reground, or repurposed materials in our products.
Our resins are pure from the start and contain zero additives like "slip" and "anti-block".
All cleanroom poly film and bags are manufactured totally within a controlled cleanroom environment in order to maintain a superior level of cleanliness. The process takes raw materials from the virgin raw state to a finished, vacuum sealed product without leaving the cleanroom environment.
Specially blended materials and a specially designed manufacturing process allows CleanPro® Film & Bags to provide products meeting or exceeding the requirements of Cleanliness Level 50 per IEST-STD-CC 1246 (formerly MIL-STD-1246) and NASA JPR 5322.1 (formerly NASA JPG 5322.1), KSC-C-123.
Standards / Methods Overview
| A-A-3174 | AMS 3649 B |
| ASTM E595 | ANSI-ASQC Z1.4 |
| ASTM F331 | MIL-PRF-23199E |
| ASTM F2095 | MIL-PRF-81705 |
| ASTM D1505 | MIL-STD-3010 |
| ASTM D 6953 | MIL-PRF-22191 |
| ASTM D257 | MIL –PRF-22019 |
| ASTM F 1140 | MIL-DTL-117 |
| USP 661 | USP 671 |
| IEST-STD-CC-1246 | NASA JPR 5322.1G |
| MIL-DTL-24466 | ANSI/ESD S-541 |
Materials
Proprietary Resin
In cooperation with our resin suppliers, we have developed a proprietary blend of Barefoot materials that allows the finished product to open easily without the addition of any anti-block. This not only allows the product to open easily, but also creates a non-scratching material that will not mar or leave any residue on critical finished products.
Due to the research conducted, and our variety of materials, CleanPro® Film & Bags can develop a custom blend of materials to fit your specific applications or requirements. Please contact us for help choosing a film to best suit your needs.
A strong general use clean packaging film specifically designed for use in clean applications. While it has a good cleanliness level, it can be slightly difficult to open. This is one of the more cost effective cleanroom packaging films available, while still providing a good level of cleanliness, strength and ease of sealing. Available in custom colors.
These products are formulated with protection from both ultra-violet degradation and penetration. The black opaque color also hides valuable products from prying eyes to help keep your light-sensitive products and equipment secure when used as a pallet cover.
View the Spec Sheet for: CFB1004
Square Bottom Covers are made with the same virgin-grade materials as our cleanroom films and are tested to ensure they meet the requirements of an ISO 14644 Class 5 (FED STD 209E-Class 100) cleanroom environment. Covers can be made from any of our polyethylene grades including LDPE, CleanTuff®, ULO®, anti-static poly (both clear and pink), UVI (black, white, or clear), in addition to several custom colors to fully meet your customer’s requirements.
This product was engineered specifically for critical products that require packaging in a film that combines low ionic contamination and ultra low outgassing. ULO® Poly packaging film has excellent handling characteristics and an extremely clean surface. With a higher gas barrier than standard low-density poly, ULO® Poly is an excellent choice for vacuum packaging applications. Available in custom colors.
View the Spec Sheet for: CFB2500
Specifically designed for use in applications where cleanliness levels exceeding IEST-CC-STD 1246D level 100 are necessary. It contains no additives such as slip, anti-block or antioxidants and exhibits excellent characteristics in the areas of Ionic Contamination, Outgassing, Non-Volatile Residue and Cleanliness. Available in custom colors.
View the Spec Sheet for: CFB3000
Used for vacuum packaging applications that require superior cleanliness levels due to the intimate contact of contamination sensitive components. Having a cloudy appearance, this material exhibits superior strength, greater puncture resistance, low non-volatile residue, low outgassing and ease of opening. Available in custom colors.
View the Spec Sheet for: CFB4000
A product that can be cleaned to the most stringent specifications, due to its hard surface. It is a strong, abrasion resistant film that is used in a variety of clean applications. Nylon is an unplasticized, FDA approved food grade clear film. Additionally, it is very low in ionic contamination and non-volatile residue.
View the Spec Sheet for: CFB5000
A product that can be cleaned to the most stringent specifications, due to its hard surface. It is a strong, abrasion resistant film that is used in a variety of clean applications. Nylon is an unplasticized, Very low in ionic contamination and non-volatile residue. Suitable for aerospace applications.
View the Spec Sheet for: CFB5100
A dual layer high clarity film designed to provide protection for those products having a high degree of sensitivity to moisture. Having an extended shelf life, a very low Moisture Vapor Transmission Rate as well as an equally low Oxygen Transmission Rate, CFB5500 will meet all of your critical packaging needs. Biax is a very strong and clear material designed for tough applications. It is typically specified for large bags that must carry a heavy load. The film does not stretch due to the orientation of the layers during the laminating process.
View the Spec Sheet for: CFB5500
Semi-transparent, electro-static, buried metal, heat-sealable, flexible structure offering excellent electrostatic shielding properties.
View the Spec Sheet for: CFB6500
Hydroblock® is a copolymer film consisting primarily of chlorotrifluoroethylene. It has excellent moisture barrier and chemical resistance as well as low oxygen permeability. It is ideal for packaging all types of corrosion sensitive military and industrial electronic parts. Hydroblock® is also recommended for use in oxygen rich environments or for packaging products used in liquid oxygen or hypergolic systems as it meets the NASA LOX Impact compatibility requirements under MSFC106A, and the flammability requirements of MIL B22191 Type I and MIL B131 Type II.
This product is manufactured from our proprietary resin blends, except with the permanent anti-stat properties as required. This in house extrusion process and control of 100% virgin resins makes this anti-static film an excellent choice for your Cleanroom packaging. Available in the “Pink Poly” industry standard for anti-stat, and also available in custom colors including blue, green, yellow, as well as clear.
A specially-designed resin blend for added strength and higher elasticity. CT100-Cleantuff also displays the characteristics of a non-mar, non-scratch material and is available in custom colors.
A specially designed HDPE resin for added strength over standard cleanroom packaging. CT200 also displays the characteristics of a non-mar, non-scratch material. Available in custom colors.
Available Formats
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.