CleanPro ECM GS

Constant Output Fan Filter Units with Roomside Replaceable HEPA Filter

Name: Constant Output Fan Filter Units with Roomside Replaceable HEPA Filter
Brand: CleanPro
SKU: C100146
Price: 2047 USD
Availability: InStock

In Stock

CleanPro® Constant Output Fan Filter Units automatically adjust to maintain airflow. They include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter and seismic clip suspension points. Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards. The standard HEPA filter is 99.99% eff. and an ULPA grade 99.9995% eff. filter is available as an option.

CleanPro® ECM GS units feature a roomside removable filter element with a gel channel on the upstream side of the final filter which provides a leak-free seal between the filter and the filter housing. Housings are fabricated from steel with a white powdercoat finish.

The EC motor blower is a 1/3 HP, motor with a forward curved blower. Units are available in 277V (60Hz).

As low as $1,857.00

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

CleanPro® Fan Filter Unit Product Information

Specification Sheets

CleanPro® Constant Output Fan Filter Units Specifications

Details

Features

Multi-use on-board Controller with either local POT control and monitoring or via MODBUS RTU network.
Factory setup and addressing to match your project specifications.
An electronically commutated motor that is programmed to increase the speed as the load increases to maintain a constant airflow.
Torque programming also available for ducted applications.
Low power consumption.
Low sound levels.

GS-Style Filter Data: The HEPA Filter is designed for 90 FPM average face velocity @ initial 0.47 w.g. and has a rated efficiency of 99.99% MPPS. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters are replaceable from roomside.

Access Port: This port is located in the center of the filter element face and is used for introducing an upstream challenge or measuring static pressure.

Air Flow: Designed for 90 FPM +/- 20%. On 2' x 4' units at 90 FPM, the CFM is 638 for the NCR style and 500 for the GS style.

Sound Level: At 90 FPM with a clean unloaded HEPA filter and zero e.s.p. the sound level is 50-53 dBa. See table below.

More Information