Viper Ionizing Air Gun with Power Adapter & 6' Hose, 100-240V

• Point-of-Use Compressed Air (7-87 psi) Ionizing Blow Off Gun neutralizes electrostatic charges to eliminate attraction, visual imperfections, and contamination issues by dislodging charged dust and debris.
• Fast Discharge Times with ±15 Volt Offset Voltage Balance.
• Meets required limits of ANSI/ESD S20.20 and ESD TR53.
• High Frequency Piezo AC with Transformer Inside of Hand Piece
• Consistent ionization performance with longer hose lengths (6-foot hose included) with no additional remote console or separate high voltage power supply required.
• Balanced: Lightweight Ergonomic Design (Less Than 0.5 Pounds)
• Aligns the center gravity with the operator's gripping hand for ease of use by operators.
• Long Handle-Trigger to reduces stress on operator's fingers.
• Slotted Nozzle Tips
• Meets OSHA requirement for pressure relief.
• Clean Dry Air (CDA) or Nitrogen
• Use with standard shop air or purchase the 19596 tip for use with Nitrogen.
• 10 Foot (3 Meter) Power Cable (100~240V) to 24VDC Power Adapter
• Use with multiple power sources by changing blades on the power adaptor.
• Status LEDs illuminate when the trigger is held down and to indicate that the gun is outputting ionized air.
• NIST Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• 100-240V Power Adapter with Interchangeable Plugs
• Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe

Specifications

• Power Supply Input Voltage: 100-240V, 50/60 Hz
• Power Supply Output Voltage: 24 VDC
• Operating Temperature: 32° F to 104 ° F (0 to 40° C)
• Dimensions: 6.5" x 5.4" x 1.0" (165 mm x 136 mm x 25 mm)
• Weight: 0.4 lbs (0.2 kg)
• Balance: ±15 V
• Ozone: <0.04 ppm
• Supply Pressure: 7.0 psi to 87 psi
• Minimum Airflow: 13 CFM
• Gas Input: Clean Dry Air (CDA) or Nitrogen
• Gas Connection 6.0 mm port
• Enclosure Gun - PBT polymer Nozzle - PPS polymer