Zero Volt Stainless Steel Benchtop Ionizing Blower, 120V
The EMIT Benchtop Zero Volt Ionizer is a compact and lightweight steady state DC auto-balancing Benchtop worksurface ionizer with integrated closed-loop feedback. The unit is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The Ionizer's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases.
The EMIT Benchtop Zero Volt Ionizer operates on Steady State DC. Steady State DC systems consist of separate negative and positive ion emitters connected by a pair of high-voltage cables to their respective high-voltage power supplies. The spacing between emitters varies depending on the design, and DC power is constantly applied to the emitter points. The ionizer utilizes feedback from the internal sensor grill to continuously adjust the output to maintain balance.
Packaging Includes
- Benchtop Zero Volt Ionizer
- Power Cord
- Emitter Point Cleaner Pack
- Certificate of Calibration
Compatible Items
- Compatible with 60507 Replacement Emitter Pins
- Compatible with 60466 Ionizer Mounting Arm
- Compatible with 60509 Ionizer Motion Sensor
- Single Fan Steady-State DC Ionizer for 16" x 24" Coverage Area
- Neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area
- Less than 2.0 Seconds Discharge Time with ±3.00 Volts Balance (Offset Voltage) at 12"
- Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53
- Sealed Plenum Air Flow
- Prevents contamination from being introduced to the workstation
- Auto-Feedback System (Audible and Visual Alarm)
- Powers down automatically and alarms should the supply voltage drop
- Selectable Input Voltage
- Configures to 120V or 220V input voltage via internal jumpers
- Low, Medium and High Fan Speeds (50-100 CFM)
- Maintains optimum performance at all speeds and allows for use with airflow sensitive applications
- Stainless Steel Enclosure
- Minimizes debris and corrosion for use in clean or sensitive areas
- North American Power Cord Included
- Works with standard electrical systems in North America
- NIST Calibrated with Certificate Included
- Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
- Made in the United States of America
Specification
- Input Voltage and Frequency: Internally selectable for 100-120V, 50/60 Hz
- Power Consumption: 12 W
- Dimensions: (including stand) 9.5" H x 6.0" W x 3.1" D (241 mm x 152 mm x 79 mm)
- Weight: 4.5 lbs. (2.0 kg)
- Balance (Offset Voltage) at 12": ±3.0 V typical ±25 V maximum
- Neutralization (Discharge) Time at 12": < 2.0 seconds
- Airflow: Three-speed fan 50-100 CFM
- Emitter Points: 0.050" diameter tungsten
- Ion Emission: Steady-state DC with sense feedback
- Fuse: 250 mA slow blow
- High Voltage Power Supply: 5.5 kVDC nominal
- Ozone: <0.05 ppm
- Enclosure: Stainless steel
- Certifications: CE
| Sell Unit | Each |
|---|---|
| PAC Item Code | I398711 |
| MFG Part Number | 50663 |
| Brand | Desco |
| Input | 120V |
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.