Desco 50690

Zero Volt Powder Coated Benchtop Ionizing Blower, 120V

The EMIT Benchtop Zero Volt Ionizer is a compact and lightweight steady state DC auto-balancing Benchtop worksurface ionizer with integrated closed-loop feedback. The unit is normally placed at one end of the workbench or area to be neutralized. It may also be mounted to a wall or shelf. The Ionizer's neutralization discharge time will be best approximately 12" to 48" directly in front of the unit and will increase as the distance from the unit increases.

Packaging Includes

Benchtop Zero Volt Ionizer
Power Cord
Emitter Point Cleaner Pack
Certificate of Calibration

$748.71

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Single Fan Steady-State DC Ionizer for 16" x 24" Coverage Area
Neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area
Less than 2.0 Seconds Discharge Time with ±3.0 Volts Balance (Offset Voltage) at 12"
Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53
Sealed Plenum Air Flow
Prevents contamination from being introduced to the workstation
Auto-Feedback System (Audible and Visual Alarm)
Powers down automatically and alarms should the supply voltage drop
Selectable Input Voltage
Configures to 120V or 220V input voltage via internal jumpers
Low, Medium and High Fan Speeds (50-100 CFM)
Maintains optimum performance at all speeds and allows for use with airflow sensitive applications
Powder Coated Enclosure
Minimizes debris and corrosion for use in clean or sensitive areas
Nort

Specifications

The comparative efficiency of Benchtop ionizers is determined by a standard test published by the ESD Association: ANSI/ESD STM 3.1. Typical positive and negative decay times (1000V - 100V) measured using this standard are shown in Figures 6 and 7. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.

Input Voltage and Frequency: Internally selectable for 100-120V, 50/60 Hz
Power Consumption: 12 W
Dimensions (including stand): 9.5" H x 6.0" W x 3.1" D (241 mm x 152 mm x 79 mm)
Weight: 4.5 lbs. (2.0 kg)
Balance (Offset Voltage) at 12": ±3.0 V typical ±25 V maximum
Neutralization (Discharge) Time at 12": < 2.0 seconds
Airflow: Three-speed fan 50-100 CFM
Emitter Points: 0.050" diameter tungsten
Ion Emission: Steady-state DC with sense feedback
Fuse: 250 mA slow blow
High Voltage: Power Supply 5.5 kVDC nominal
Ozone: <0.05 ppm
Enclosure Powder: coated aluminum
Certifications: CE Country of Origin United States of America

More Information

More Information
Sell Unit	Each
PAC Item Code	I398573
MFG Part Number	50690
Brand	Desco
Input	120V