72" Ionizing Bar with 18 Emitters
The EMIT Non-Air Assisted Ion Bar System has been designed to effectively eliminate localized static charges that exist in the work area. The Non-Air Assisted Ion Bar System is a pulsed DC ionizer. The bar's emitters have alternating polarities over the length of the bar. This design results in less ion recombination than when the same emitter is used to output both polarities. The EMIT Non-Air Assisted Ion Bar System meets the ANSI/ESD S20.20 required limit of less than ± 50 volts offset voltage (balance) tested in accordance with ANSI/ ESD STM3.1. Per S20.20 Discharge.
Ion bar must be used with HV Controller, item 50855 recommended.
Controller Options
- Recessed potentiometer adjustment, 120
- External potentiometer adjustment, 120V
Process Technology
- Cost-effective alternative to overhead ionization
- Reduces particulate contamination
- Effective ESD control within a Laminar Flow Hood or Mini environment
- Lightweight, small, cross-sectional design allow it to fit in tight spaces
- Ion bars can be daisy-chained to connect multiple bars in sequence.
- One power supply can drive up to 40 emitter tips.
- Jumper can be made in lengths to fit every need
- Constructed of ABS plastic and aluminum top caps for ease of mounting
- Bars are pre-drilled with mounting brackets
- Rapid neutralization over a localized area
- Replaceable bayonet style thoriated tungsten emitters
- Controllable pulse rate
- DC ionization
- Current limited emitters
- Controllable polarity balance
- Bars can be customized to fit any length
- Made in the United States of America
| Sell Unit | Each |
|---|---|
| PAC Item Code | I398581 |
| MFG Part Number | 50905 |
| Brand | Desco |
| Length | 72" |
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.