Desco 60468

Chargebuster® 3-Fan Overhead Ionizing Blower with 2 Lights, 120V

Desco Chargebuster® Overhead Ionizers are steady-state DC ionizers designed for use in ESD protected areas. 3-fan ionizers have a 2.0' x 5.0' coverage area. The Chargebuster® Overhead Ionizers' discharge times (< 3.0 seconds at 18") and low offset voltage (±10 volts) meet the required limits of ANSI/ESD S20.20 < ±35 volts tested per ANSI/ESD STM3.1 and ESD TR53. Its emitters are made of pure tungsten and spaced further apart to minimize ion recombination, increase discharge efficiency and provide a broader coverage area. The fans have 3.0 speeds (high, medium, low) which produce consistent performance at all 3.0 settings. The Chargebuster® Overhead Ionizers utilize an auto-feedback system that continuously optimizes its performance and automatically alarms and shuts down should its supply voltage drop.

Packaging Includes

Chargebuster® Overhead Ionizer
Hanging Kit
Power Cord
3 Emitter Point Cleaners
Certificate of Calibration

$1,356.75

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Three Fan Steady-State DC Ionization for 2.0' x 5.0' Coverage Area. Neutralizes electrostatic charges on insulators and ungrounded conductors within the coverage area.
3.0 Seconds or Less Discharge Time with ±10 Volts Offset Voltage (Balance)
Meets the required limits for ionization use in electronics manufacturing areas per ANSI/ESD S20.20 and ESD TR53
Two 700 Lumen LED Panel Lights (Cool White) add additional light to operator work area for improved visibility
3.0 Position Fan Speed: Low, Medium, High. Ionization performance is consistent at all speeds and allows for use with sensitive applications, such as calibration, test, or repair procedures
Sealed Plenum Air Flow prevents contamination from being introduced to workstation
Auto-Feedback System (Audible And Visual Alarm Through Single Tri-Color LED). Unit will automatically shut down and alarm if/when supply voltage drops
120/220V Input Voltage Selectable allows this unit to be used with 110V or 220V power sources
Replaceable Emitter Pins field replaceable emitter pins allow for minimal downtime
Compatible Ionizer Motion Sensor 60509, activates an ionizer when an operator is present and deactivates when the workstation is vacant to conserve energy and reduce ionizer maintenance
NIST Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
Made in the United States of America.

Specifications

Typical positive and negative discharge times (1000V to 100V) measured using ANSI/ESD STM 3.1 are shown in the "Neutralization (Discharge) Times" section. The performance of the ionizer was measured with the unit positioned as shown, with the fan speed on high and without a filter.
Input Voltage and Frequency: Internally selectable for 100-120VAC, 50/60 Hz
Power Consumption: 3-Fan Overhead: 36 W
Dimensions: 3-Fan Overhead: 30.9" H x 6.6" W x 37.3" L (99 mm x 168 mm x 947 mm)
Weight: 3-Fan Overhead 10 lbs. (4.5 kg)
Balance (Offset Voltage) at 18": ±10 V typical ±20 V maximum
Neutralization (Discharge) Time at 18": < 3.0 seconds
Airflow (three-speed fans): 3-Fan Overhead: 150-300 CFM
Emitter Points: 0.050" diameter tungsten Ion Emission Steady-state DC with sense feedback Fuse 400 mA slow blow
High Voltage Power Supply: 5.5 kVDC nominal
Ozone: <0.05 ppm
Enclosure Powder: coated steel
Mounting Options: Rigid-mounted or suspended from ceiling
Lighting: 700 lumen each Cool white color 12 year estimated life expectancy (based on an average use of 10 hours per day)
Certifications: CE

More Information

More Information
Sell Unit	Each
PAC Item Code	I210472
MFG Part Number	60468
Brand	Desco
Input	120V