ADS 200 AccuDrive™ 120V Soldering Station with ISB Cubby
- ESD-Safe
- No Calibration Required
- Temperature Range 193-454°C / 380-850°F
- 3 Tips included
- Wet and Dry Cleansers
Tips sold separately.
- Handpiece is compatible withPACE TD-200 Tips and PACE TD-200 Desolder Tips
Includes
- TD-200 AccuDrive Tip-Heater Cartridge Soldering Iron
- Instant-Setback Cubby. Can hold up to 7 tips, comes standard with sponge, stay moist well and brass wool to clean oxidation from tip.
- 3 Popular Tips: 1/32" (0.80mm) Conical Sharp Extended Tip 1/32" (0.80mm) 30° Chisel Tip and 1/16" (1.59mm) 30° Chisel Tip.
Cool Touch™ TD-200 Tip-Heater Cartridge Iron
Beneath its sleek dimensions, comfortable ergonomics and cool touch, the TD-200 makes continuous production soldering effortless. With an ultra-short tip-to-grip (1.9"/48mm) and comfortable ergonomic design, the TD-200 dramatically reduces grip stress and operator fatigue, while delivering precision operator dexterity, especially when used under a magnifier or microscope. The TD-200's aluminum Cool Touch™ handle stays cool and comfortable even during extended production use. And with PACE's new AccuDrive heating technology, this iron provides accurate tip temperatures, heat-up/recovery, and high-capacity heating - all at safe low temperatures.
Instant SetBack Cubby (ISB)
New Tip and Tool Stand for the TD-200 and TD-100A handpieces. The Instant SetBack Cubby (ISB) automatically lowers the temperature when the TD-200 is placed in the stand. This will greatly increase tip life as well as save energy. The tool stand features a new wide-angled mouth that allows the operator to easily insert and remove their soldering iron while still being able to hold it securely. Each tip and tool stand allows for safe and secure holding of either handpiece, hot tips, tip tool, water sponge, cleaning brush and can be mounted to the side of the PACE power source. The unit incorporates a low abrasive dry wipe made of fine metal coil that won't drop tip temperature, cleans better than conventional sponges, won't damage your tips, and allows for removal of caked on/burned-on lead-free fluxes and oxides. The sponge/water well is still included, but not really necessary! Each tip and tool stand is constructed with heavy duty, corrosion resistant metal.
AccuDrive® Blue Series Tip-Heater Cartridges
Inexpensive Cartridges
Less than half the price of most cartridge style or curie point tips, delivers lowest cost of ownership.
One Tip Geometry, Any Temperature
Unlike with curie point tips, select any temperature for a chosen tip cartridge without having to buy additional ones.
Accurate, Honest Temperatures
Consistent, accurate tip temperatures meet or exceed J-STD-001 requirements.
High Capacity Integrated Heater
Delivers up to 120 Watts of pure power.
Superior Heat Transfer/Delivery
Allows for safer, lower temperatures, reduces risk of PCB damage and improves tip life.
Hot-Swappable Quick-Change Tips
Fast & easy change-out within 2 seconds, without turning the unit off.
Fast Initial Heat-Up
Achieves set temperatures in seconds.
Wide Variety of Tip Geometries Available
For the most delicate of micro-soldering to challenging, high thermal mass applications.
Specifications
- Dimensions: 104mm x 130mm x 152mm / 4.1"(H) x 5.1"(W) x 6"(D)
- Weight: 2.3kg / 5 lbs.
- RoHS Compliant: Yes
- Control Technology: AccuDrive®
- Tip-to-Ground Resistance: 2 Ohms or less
- Meets or Exceeds ANSI/J-STD-001: Yes
- Tested using ANSI/ESD S13.1-2015: Yes. Tested up to 50MHz using S13.1-2015 Method. Meets or exceeds J-STD-001 and ESD S20.20 requirements.
- Meets or Exceeds ANSI/ESD S20.20: Yes
- Temperature Accuracy: Meets or exceeds ANSI/J-STD-001 requirements.
- Temperature Range: 193-454°C / 380-850°F
- Tip Compatibility: Uses AccuDrive™ Blue Series Tip-Heater Cartridges
Sell Unit | Each |
---|---|
PAC Item Code | I234238 |
MFG Part Number | 8007-0593 |
Brand | PACE |
ESD-Safe | Yes |
Adjustment | Digital |
Output | Single Tool |
Input | 120V |
Includes | Tool(s) & Stand |