TB-9111 Static Sensor & Air Ionizer Test Kit

• Portable Kit for Testing of Offset Voltage and Discharge Times of Air Ionizers and Electrostatic Fields, measures surface voltage and polarity on objects up to ±19.99 kV at a distance of 1"
• Aluminum Conductive Plate, pairs with the SCS Static Sensor to measure offset voltage and discharge times for the periodic verification of ionizers per ANSI/ESD SP3.3 and ESD TR53
• ±1000V Charger, applies charge to the conductive plate to measure discharge times of air ionizers
• Dissipative Enclosure with 7mm Ground Snap, grounds the meter when held by a grounded operator or bonded to ground using the included ground cord
• Rotary Zero Knob, sets the zero-reference point with finely tuned precision
• LED Range Indicator, assists with placing the meter at the correct distance from the object being measured
• Hold Button, allows the measurements to be retained for easy reading and extends battery life
• Carrying Case Included, utilizes a polypropylene enclosure and polyurethane foam insert to protect and store the instruments
• NIST Calibrated with Certificate Included, calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• Made in the United States of America.

Test Kit Specifications

• Conductive plate Assembly: Aluminum bracket, bare aluminum plate and Teflon spacers isolate plate from bracket
• Voltage Output: 1/10,000 of measured voltage
• Conductive plate Area: 2.95" W x 1.18" L; (7.5 x 3.0 cm)
• Conductive plate Assembly Weight: 2.4 oz. (68 g)
• Charger Dimensions: 1.1" H x 2.6" W x 4.5" L; (2.8 x 6.6 x 11.4 cm)
• Charger Weight: 5 oz. (140 g) with battery
• Charger Power Requirements: One 9-volt alkaline battery: 1.1 kV minimum for ± voltage
• Certifications: CE

Static Sensor Specifications

• Performance Measurement Range: 0 to ±19.99 kV / inch
• Performance Measurement Accuracy: Better than ±5% of reading, ±2 counts
• Performance Measurement Stability: ±10 counts
• Front Panel Mete Voltage Display 3-1/2 digit LED display
• Sampling Rate 3 readings per second

Specifications

• Ranging System LED distance indicator; aligned targets indicate 1"
• Range LED distance indicator
• Rotary Zero Knob Sets the zero-reference point
• Low Battery Indicator An LCD icon indicates when the battery is low
• Hold Switch Retains the LCD display reading when depressed
• Dimensions: 0.9" H x 2.8" W x 4.9"L; (24 mm x 70 mm x 126 mm)
• Weight: 4.9 oz. (140 g) with battery
• Operating Temperature: 50 to 86°F (10 to 30°C)
• Operating Relative Humidity: To 80%, non-condensing
• Operating Altitude: To 2000 m
• Certifications: CE
• Power Requirements: Power One (1) 9-volt alkaline battery
• Operating Time: Greater than 50 hours, with a new battery at 21°C continuous