Yamato Scientific
DN-411IE
220V Forced Convection Inert Gas Oven, 3.4 Cubic Ft.
Inert ovens suitable for temperature test and heat treatment in a non-oxidizing environment, by introducing N2 gas into the chamber.
- Heat resistance test and heat treatment of up to 360°C
- Simple operation by interactive key input
- Standard equipped with various operation modes such as program operation and calibration offset function, power failure recovery mode selection, and user configuration information saving
- Repeatable operation function up to maximum 99 steps, 99 patterns controller with repeat function
- N2 gas flow amount controllable
- Enhanced safety countermeasure, including self-diagnostic functions, digital setting, independent overheat prevention device and electric leakage breaker
- In case of door opening during operation, fan and heater turn OFF by door switch
$9,510.00
- System: Forced Convection
- Operating Temp. Range: Room Temp. +15 to 360°C
- Temp. Adjustment Accuracy: ±0.2°C (at 360°C)
- Temp. Fluctuation: ±0.6°C (at 360°C)
- Temp. Uniformity: ±3°C (at 360°C)
- Temp. Gradient: 20°C(at 360°C)
- Max. Temp. Reaching Time: ~60 min.
- Nitrogen Substitution Time Required: ~70 min. (ordinary temp with oxygen concentration of 2%)
- Interior: Stainless steel plate
- Exterior: Cold rolled steel plate with baked melamine resin coating
- Heat Insulator: Glass wool + Ceramic fiber
- Heater: SUS Pipe Heater 3.0kW
- Sensor: K thermocouple for temperature control and independent overload prevention device
- Fan Type / Motor: Sirocco Fan / Condenser Type
- Flow Meter, Gas Carrier: Max. Flow 30L/min, O.D. 9mm Hose Nipple
- Temp. Controller: PID Control by microcomputer
- Temp. Display Type: Temp. display: Digital display by 4 digit green LED (resolution:1°C) Setting temp. display: Digital display by 5 digit orange LED (resolution:1°C)
- Timer / Timer Resolution: 1min. ~ 99hrs. 59mins. or 100hrs. ~ 999hrs. / 1min. or 1hr.
- Operation Function: Fixed temp. operation, Auto-start, Auto-stop, Quick auto-stop, Program Operation
- Program Mode: Repeatable operation function up to max 99 steps or 99 patterns.
- Additional Functions: Power on and operation time integrating function (up to 65535 hours), calendar time (24 hours), calibration offset, Monitor display of integrated power consumption, total CO2 emissions and heater operating output, power failure recovery mode, save and read out of user settings
- Heater Circuit Control: Triac with Zero-cross
- Safety Device: Self diagnostic functions (Sensor failure, SSR short circuit, Heater line disconnection, Main Relay contact damaged, Automatic overheat prevention), Key lock function, Independent overheating prevention, Electric leakage breaker, Door switch
- Internal Dimensions WxDxH: 470 x 450 x 450 mm
- External Dimensions WxDxH: 640 x 695 x 915 mm
- Internal Capacity: 95L
- Shelf Max. Load: ~30kg / shelf
- Shelf Support Qty. / Pitch: 12pcs. / 30mm
- Power Source: Single phase 220V 13.5A (no plug, round terminal)
- Weight: ~90kg
- Shelf Plate / Bracket: Stainless wire, 2 pcs. / 4 pcs.
| Sell Unit | Each |
|---|---|
| PAC Item Code | I347630 |
| MFG Part Number | DN-411IE |
| Brand | Yamato Scientific |
| Temperature Range | Up to 360°C |
| Input | 220V |
| Type | Forced Air |
Newsletter
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.