Yamato Scientific DT-611

220V Forced Convection Cleanroom Oven, 7.63 Cubic Ft.

The Yamato DT Class 100 forced convection cleanroom ovens feature advanced temperature control and uniformity for temperature testing in a dust-free environment. Rely on the DT mechanical clean room ovens to carry out unmatched drying, sterilization, or any heating applications that require a temperature range of up to 360°C.

Improved visibility and operability with its V type controller
Displays power consumption, CO₂ emissions and heater manipulated variables on the control panel
Adopts anti-fouling casters which prevents wheel contamination during transportation
Improved visibility of HEPA filter replacement timing by three color indication
Enhanced safety with its phase-reversal relay detecting incorrect power source at installation
Lower equipment height compared to previous models (DT411 approximately ~200 mm shorter)
Larger cable port from Φ30mm to Φ33mm
Improved optional accessories and more customization options

$23,970.00

Skip to the beginning of the images gallery

Technical Documents

Warranty

Yamato Scientific Product Warranty

Details

Circulation Method: Forced convection
Operating Temp. Range: Room temperature +30 to 360°C
Temp. Control Accuracy: ±0.3vC at 360°C
Temp. Fluctuation: ±0.5°C at 360°C
Temp. Distribution Accuracy: ±4.0°C at 360°C
Temp. Gradient: ±20.0°C at 360°C
Max. Temp. Reaching Time: ~80 mins.
Clean Level: Class 100 (when temperature is stable)
Interior/Exterior Material: Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat Insulating Material: Glass wool
Door: Single side left swing
Heater: Stainless steel pipe heater
Fan Type: Sirocco fan, Condenser motor 400W
Differential Pressure Meter: Analog type (0 ~ 300Pa)
Cable Port/ Exhaust Port: Inner diameter: 33mmx1 (right side) / Outer diameter 61mm
Filter: Heat resistant HEPA filter (dust-collection efficiency >99.97% up to 0.3*micro;m particle filtering)
Caster Wheels / Adjuster: Free swivel caster wheels without stopper / level adjuster (2 at front)
Temp. Control/Setting Method: PID V control / Digital setting with ▲/▼ keys
Temp. Display System: Top screen: green 4-digit digital LED (resolution 1°C), Bottom screen: orange 5-digit digital LED (resolution 1°C)
Other Indications: LED indicates temperature patterns for heating/stabilizing/cooling
Operation Functions: Constant temperature operation, Programmed operation (Maximum 99 steps, up to 99 patterns, repeat operation function), Duration/time select operation function (auto start/auto stop/quick auto stop, program operation)
Additional Functions: Variable fan speed, Accumulated on time, operation time function (up to 65,535 hours); calibration offset; accumulated power consumption monitoring, total CO₂ emission monitoring, heater output monitoring; power recovery; setting data save and restore
Sensor: K type Thermocouple dual sensor (temperature control and independent overheat prevention device sensors)
Heater Control: Triac with zero-cross control
Safety Device: Self-diagnostic functions (Detection for Temp. Sensor Failure, Triac Short Circuit, Automatic overheating prevention, Fan motor failure detection, Heater Line Disconnect, Main Relay Contact Damage), Earth leakage breaker, Key Lock Function, Independent overheating prevention device, Phase reversal relay, Door switch
Earth Leakage Breaker: 20A Current leak /short circuit/surge protection, rated sensitivity 30mA
Door Switch: Door open: fan motor and heater circuit off, Door close: fan motor and heater circuit on
Internal Dimensions WxDxH: 600x600x600 mm
External Dimensions WxDxH: 850x1175x1720 mm
Internal Capacity: 216L / 7.62 cu.ft.
Weight:~270 kg / ~596 lbs.
Shelf Rest / Pitch: 17 steps / 30mm
Withstand Load Of Shelf: ~30 kg / shelf
Power Supply 50/60Hz (V±10%): 220V 3 phase 14A
Shelf Plate / Bracket: 3 pcs. / 6 pcs.

* Conditions: temperature and humidity: 23°C+, 65% RH ±20%, atmospheric pressure 86kPa ~106kPa (no load), exhaust damper and intake closed

More Information

More Information
Sell Unit	Each
PAC Item Code	I393171
MFG Part Number	DT-611
Brand	Yamato Scientific
Cleanroom-Safe	Yes
Cleanroom Class	ISO Class 5 (Fed. Class 100), ISO Class 6 (Fed. Class 1,000), ISO Class 7 (Fed. Class 10,000)
Temperature Range	30° to 360°C
Input	220V
Type	Forced Air