Yamato Scientific DTS-830

220V Forced Convection Class 100 Clean Oven, 11.55 Cubic Ft.

Space saving, large capacity forced convection Class 100 clean oven.

Improved visibility and operability of control panel
Stable cleanliness through forced circulation with rear exhaust
Displays power consumption, CO₂ emissions and heater manipulated variables on the control panel
Incorporates a maximum of 99 steps, 99 patterns program controller with repeat function
Offers several options such as recorder, manual/auto damper, N₂ gas introducer with flow meter and emergency switch
DES830 convertible to high performance filter type maintaining Class 100 at stable and fluctuating temperature up to a maximum of 200°C

$28,355.00

Skip to the beginning of the images gallery

Technical Documents

Warranty

Yamato Scientific Product Warranty

Details

Circulation Method: Forced convection
Operating Temp. Range: Room temperature +30 to 360°C
Temp. Control Accuracy: ±0.5°C at 360°C
Temp. Fluctuation:±0.5°C at 360°C
Temp. Distribution Accuracy: ±5.0°C at 360°C
Temp. Gradient: ±10.0°C at 360°C
Max. Temp. Reaching Time: ~80 min.
Clean Level: Class 100 (when temperature is stable)
Interior Material: Stainless steel
Exterior Material: Cold rolled steel plate with melamine resin baking finish
Heat Insulating Material: Glass wool
Heater: 9.0kW (stainless steel pipe heater)
Fan Type: Scirocco fan, condenser type motor 200W x 2
Differential Pressure Meter: Analog type (0 ~ 300Pa)
Cable Port: Inner diameter: 33mmx1 (right side)
Filter: Heat resistant HEPA filter (dust-collection efficiency >99.97% with a 0.3µm particle)
Caster Wheels / Adjuster: Free swivel caster wheels without stopper / level adjuster (2 at front)
Temp. Control / Setting Method: PID V control / Digital setting with ▲/▼ keys
Temp. Display System: Top screen: green 4-digit digital LED (resolution 1°C), Bottom screen: orange 5-digit digital LED (resolution 1°C)
Other Indications: LED indicates temperature patterns for heating/stabilizing/cooling
Operation Functions: Fixed temperature operation, Program operation (maximum 99 steps up to 99 patterns, with repeat operation function), Timer or clock operation function (Fixed temperature operation w/ auto start/auto stop/quick auto stop, program operation auto start)
Additional Functions: Power-on Time and Operation Time Accumulation Monitor (up to 65,535 hours); Calibration Offset; Monitoring Display for Accumulated Power Consumption, Total CO₂ Emissions, and Heater Operation Output; Power Recovery Mode; Setting Data Backup and Recovery, External Communication Terminal (RS485)
Sensor: K type thermocouple double sensor (for temperature control and independent overheat prevention device)
Heater Control: Triac with zero-cross control
Safety Device: Self-diagnostic functions (Detection for Temp. Sensor Failure, Triac Short Circuit, Automatic overheating prevention, Heater Line Disconnect, Main Relay Contact Damage ), Earth leakage breaker, Fan Motor Failure, Key Lock Function, Independent overheating prevention device
Earth Leakage Breaker: 40A Leak Current/Short Circuit/Over-current Protection, Rated Current Sensitivity 30mA
Door Switch: Door open: fan motor and heater circuit off, Door close: fan motor and heater circuit on
Internal Dimensions**: 620x480x1100 mm (WxDxH)
External Dimensions: 850x1080x1955 mm (WxDxH)
Internal Capacity: 327L
Weight: ~335 kg
Withstand Load Of Shelf: ~30 kg / shelf
Number Of Shelf Bracket Step / Pitch: 35 steps / 30mm
Power Supply 50/60Hz (V±10%): AC220V, three phase, 24A (no plug, round terminal)
Shelf Plate / Bracket: 3 pcs. / 6 pcs.

* Conditions: temperature and humidity: 23°C+, 65% RH ±20%, atmospheric pressure 86kPa ~106kPa (no load)
** Protrusions excluded.

More Information

More Information
Sell Unit	Each
PAC Item Code	I393173
MFG Part Number	DTS-830
Brand	Yamato Scientific
Cleanroom-Safe	Yes
Cleanroom Class	ISO Class 5 (Fed. Class 100), ISO Class 6 (Fed. Class 1,000), ISO Class 7 (Fed. Class 10,000)
Temperature Range	30° to 360°C
Input	220V
Type	Forced Air