Yamato Scientific
RE-601-BW
115V Digital Rotary Evaporator, includes Water Bath
Yamato rotary evaporators were designed for ease of use. Each unit comes standard with digital display for both bath temperature and rotational speed, allowing you to record and repeat parameters easily. The movable rotary joint accommodates different size glassware and allows for a change in the contact position of the vacuum seal. Quick release evaporating flask allows for easier addition and removal of sample. Built-in safety feature shuts off rotary evaporator if abnormalities are detected.
$7,420.00
- Motor: DC brushless motor (for rotation) and Rod Actuator (for lifting)
- Controller: Vacuum regulator VR600
- Number of Revolutions: 10-250 r/min (rpm)
- Motorized Lift Stroke: 150mm
- Setting Range of Vacuum: 0 - 981hPa
- Measurable Range of Vacuum: 0 - 1033hPa
- Resolution of Vacuum: 1hPa
- Setting Range of Hysteresis: 1-50hPa
- Resolution of Vacuum: 1hPa
- Setting Range of Hysteresis: 1 - 50hPa
- Resolution of Vapor Temperature Indicator: Selectable (either 1°C or 0.1°C)
- Readout of Cooling Water Temperature: Depending on Indicator (option)
- Resolution of Cooling Water Temperature Indicator: 1°C
- Operation Modes: Manual without vacuum control, preset, preset with timer, pressure gradient, and gradient with timer
- Setting Range of Timer: 1-999 minutes in increments/decrements of 1 minute for preset operations, 1-99 minutes for progressive operations
- Memory: 10 programs/operation mode
- Speed (rpm setting): Control knob (digital indication)
- Safety Measures (drive unit): Manual-setting lower limit, upper limit, motor overload
- Safety Measures (vacuum regulator): Self-diagnosis, main unit/bath synchronized stop at malfunctions
- Synchronized control feature: Selection of automatic bath stop or automatic insulation
- Lifting feature: Motorized lifting system
- External Dimension with Glassware B (mm): 643(W)x 400(D)x727(H)(857(H) when raised
- Weight: Approx. 14kg(excluding the glassware and the water/oil bath)
- Power supply: 100 - 240V AC, 1.5A (excluding the water/oil bath)
BM-500 Bath
- Operating Temp. Range: Room temp. +5°C to 90 °C
- Temp adjustment accuracy: ±1.5°C (When stirring)
- Control system: PID control by microprocessor
- Set-up system: Digital setting by key
- Extra function: Key log function, SE signal transmission and reception, power failure guarantee operation, calibration offset
- Sensor: K-thermocouple
- Heater: 1kW (at 100V) 1.44kW (at 120V)
- Safety countermeasures: Protection cover for bath. Self-diagnostic functions (Automatic overheat prevention, Sensor trouble, Triac short circuit, heater burn out, main relay failure), socket breaker, thermal fuse
- Interlock control function: Automatic control signal receive by RE600/800 controller, Error report to RE600/800
- Bath Capacity/Material: 4 L
- Water Tank: Ø 240 x bottom 165 X depth 122mm
- External dimensions(WxDxH mm): 340 x 349 x 231
- Power source: AC100V-120V 10.5 - 12.5A (15A)
- Weight: Approx. 5.5kg
- Accessories: Bar thermometer (10 to 110deg.C) with immersion line
| Sell Unit | Each |
|---|---|
| PAC Item Code | I347783 |
| MFG Part Number | RE-601-BW |
| Brand | Yamato Scientific |
| Adjustment | Digital |
| Input | 115V |
| Includes | Water Bath |
Newsletter
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.