Yamato Scientific
RE-801-AO
115V Digital Rotary Evaporator, includes Oil Bath
Yamato rotary evaporators were designed for ease of use. Each unit comes standard with digital display for both bath temperature and rotational speed, allowing you to record and repeat parameters easily. The movable rotary joint accommodates different size glassware and allows for a change in the contact position of the vacuum seal. Quick release evaporating flask allows for easier addition and removal of sample. Built-in safety feature shuts off rotary evaporator if abnormalities are detected.
$7,180.00
- Motor: DC brushless motor (for rotation) and Rod Actuator (for lifting)
- Controller: Vacuum regulator VR800
- Number of Revolutions: 10-250 r/min (rpm)
- Motorized Lift Stroke: 150mm
- Setting Range of Vacuum: 0 - 981hPa
- Measurable Range of Vacuum: 0 - 1033hPa
- Resolution of Vacuum: 1hPa
- Setting Range of Hysteresis: 1-50hPa
- Resolution of Vacuum: 1hPa
- Setting Range of Hysteresis: 1 - 50hPa
- Resolution of Vapor Temperature Indicator: Selectable (either 1°C or 0.1°C)
- Readout of Cooling Water Temperature: Depending on Indicator (option)
- Resolution of Cooling Water Temperature Indicator: 1°C
- Operation Modes: Manual without vacuum control, preset, preset with timer, pressure gradient, and gradient with timer, Auto I (drying), Auto II (for one solvent), and Automatic III (for more than two solvents) modes
- Setting Range of Timer: 1-999 minutes in increments/decrements of 1 minute for preset operations, 1-99 minutes for progressive operations
- Memory: 10 programs/operation mode
- Data of Solvents: 53 saturated vapor pressure curves
- Speed (rpm setting): Control knob (digital indication)
- Safety Measures (drive unit): Manual-setting lower limit, upper limit, motor overload
- Safety Measures (vacuum regulator): Self-diagnosis, main unit/bath synchronized stop at malfunctions
- Synchronized control feature: Selection of automatic bath stop or automatic insulation
- Lifting feature: Motorized lifting system synchronized with control
- External Dimension with Glassware A (mm): 828(W)x 400(D)x727(H)(857(H) when raised
- Weight: Approx. 14kg(excluding the glassware and the water/oil bath)
- Power supply: 100 - 240V AC, 1.5A (excluding the water/oil bath)
BO-400 Bath
- Operating Temp. Range: Room temp. +10°C to 180 °C
- Temp adjustment accuracy: ±2°C (When stirring)
- Control system: PID control by microprocessor
- Set-up system: Digital setting by UP/DOWN key
- Extra function: Key log function, RE signal transmission and reception, power failure guarantee operation, calibration offset
- Sensor: K-thermocouple
- Safety Function: Self diagnostic function (Automatic overheat prevention, sensor err), circuit break (combined switch), temp. fuse, water tank detection switch
- Interlock Control Function: Automatic control signal receive by RE601/801 controller, Error report to RE601/801
- Inner Tank: Approx. 4L max inner diameter 240 x bottom diameter 165 x depth 122mm
- External Dimensions: 340W x 349D x 231H
- Weight: 5.5kg
| Sell Unit | Each |
|---|---|
| PAC Item Code | I347790 |
| MFG Part Number | RE-801-AO |
| Brand | Yamato Scientific |
| Adjustment | Digital |
| Input | 115V |
| Includes | Oil Bath |
Newsletter
Sign up to be the first to know about new products, promotions and industry news.
Sign Up
Production Automation Corporation is ISO 9001:2015 Certified.