Desco 19271

X3 Combo Tester with Stand

In Stock ESD-Safe

Tests Operator’s Path-To-Ground; Wrist Strap Limits 750 kilohms to 10 megohms, Footwear Limits 750 kilohms to 35 megohms^1:Determines that the operator’s personal grounding devices (wrist straps², foot grounders, ESD shoes, smocks³) are functioning correctly.
Simultaneous Testing of Wrist Strap and Footwear in Less Than 3 Seconds: Reduces time spent testing personal grounding devices used in ESD Control Plans
Solid-State Test Switch with No Moving Parts: Maintains accuracy of tests and extends the lifetime of the tester
Split Foot Plate for Testing Foot Grounders (or ESD Shoes): Tests both foot grounders independently at the same time
30 Volt Test Signal: Provides accurate tests that are not humidity dependent
Relay for Use with Automatic Doors or Other Locking Systems: Controls access to ESD Protected Areas
Heavy Gauge Grey Powder-Coated Stand: Allows the Combo Tester X3 to be set up in a convenient area for the testing of operators
Compatibility with ESD Glove Test Fixture: Pair with the EMIT 50755 ESD Glove Test Fixture to allow operators to perform tests while wearing gloves or finger cots
Calibration Verification: Use the EMIT 50424 Limit Comparator to check the test limits of the Combo Tester X3 without removing it from the workplace
NIST Calibrated with Certificated Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology. For more information on the calibration of Desco products, see Calibration.
100-240VAC Power Adapter with Interchangeable Plugs: Works with standard electrical systems in North America, the United Kingdom, Japan, Asia, and Europe
Made in the United States of America

$1,342.50

Skip to the beginning of the images gallery

Technical Documents

Product Info & TDS Sheets

Desco Combo Tester X3 Installation, Operation and Maintenance

Details

¹Default test limits are listed. Additional test settings are noted in the technical bulletin.

²The Combo Tester X3 can verify both single-wire and dual-wire wrist straps.

³The Combo Tester X3 will also test a Groundable Static Control Garment System. The Groundable Static Control Garment System must have an RTG of < 3.5 x 10⁷ ohms to meet the required limit of ANSI/ESD S20.20-2007 tested per ANSI/ESD STM2.1 and ESD TR53.

More Information