Digital Surface Resistance Meter Kit

Features

• NEW Large OLED Display: Displays resistance mantissa and exponent, temperature, relative humidity, and test voltage
• NEW Internal Memory: Stores and recalls up to 100 measurements. Captures resistance, temperature, humidity, and test voltage.
• NEW Measurement Stability Modes: Sets the 15-second electrification period for test requirements
• NEW Electrode Spacers: Spaces the 5 lbs. electrodes to 10 and 36 inches for resistance point-to-point (Rtt) measurement requirements of ANSI/ESD S.1 and ANSI/ESD S4.1
• NEW Measurement Location Labels (Pack of 25): Labels and tracks areas and materials measured for surface resistance
• Digital Compliance Verification Surface Resistance Meter Kit: Measures resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of worksurfaces, flooring systems, garments, packaging, and other materials in accordance with ESD Association documents: ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1, and others
• Resistance Range: 1.0 x 10³ to 1.0 x 10¹² Ohms: Determines if a surface is conductive, dissipative, or insulative for ESD control applications in electronics manufacturing or handling environments
• Under Load Test Voltages (10V or 100V ±5%): Meets ANSI/ESD S20.20 resistance testing requirements for product qualification and compliance verification
• 50005 Concentric Ring Probe Accessory: Measures surface resistance per ANSI/ESD STM11.11 and volume resistance per ANSI/ESD STM11.12 of planar material
• NEW 19295 Handheld Electrode Accessory: Meets resistance measurement requirements of TR53, ANSI/ESD STM97.1, and other documents
• NIST Calibrated with Certificate Included: Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• Made in the United States of America

Measurement Stability Modes:

Auto Stabilization enables a 15-second electrification period when the measured resistance is 1 x 10¹⁰mohms or greater to maintain test accuracy.

Fixed Stabilization complies with ANSI/ESD S4.1 and enables a 15-second electrification period when the measured resistance is 1 x 10⁶ ohms or greater.